IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf

上传人:roleaisle130 文档编号:1241126 上传时间:2019-08-25 格式:PDF 页数:88 大小:2MB
下载 相关 举报
IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf_第1页
第1页 / 共88页
IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf_第2页
第2页 / 共88页
IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf_第3页
第3页 / 共88页
IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf_第4页
第4页 / 共88页
IEC 60364-5-54-2011 Low-voltage electrical installations - Part 5-54 Selection and erection of electrical equipment - Earthing arrangements and protective condu.pdf_第5页
第5页 / 共88页
点击查看更多>>
资源描述

1、 IEC 60364-5-54 Edition 3.0 2011-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage electrical installations Part 5-54: Selection and erection of electrical equipment Earthing arrangements and protective conductors Installations lectriques basse-tension Partie 5-54: Choix et mise en uvre des

2、 matriels lectriques Installations de mise la terre et conducteurs de protection IEC 60364-5-54:2011 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of

3、 this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright

4、or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utili

5、se sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplm

6、entaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC)

7、is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition

8、 a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publica

9、tions. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and el

10、ectrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on thi

11、s publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des nor

12、mes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut a

13、voir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications re

14、tires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnai

15、re en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webst

16、ore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60364-5-54 Edition 3.0 2011-03 INTERNATIONAL STANDA

17、RD NORME INTERNATIONALE Low-voltage electrical installations Part 5-54: Selection and erection of electrical equipment Earthing arrangements and protective conductors Installations lectriques basse-tension Partie 5-54: Choix et mise en uvre des matriels lectriques Installations de mise la terre et c

18、onducteurs de protection INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 29.020; 91.140.50 PRICE CODE CODE PRIX ISBN 978-2-88912-400-8 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT Registered trademark of the International Electrotechnical Com

19、mission Marque dpose de la Commission Electrotechnique Internationale 2 60364-5-54 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 6 541 General . 7 541.1 Scope . 7 541.2 Normative references . 7 541.3 Terms and definitions . 8 542 Earthing arrangements 9 542.1 General requirements . 9 542.2 Earth ele

20、ctrodes . 10 542.3 Earthing conductors . 12 542.4 Main earthing terminal 13 543 Protective conductors 13 543.1 Minimum cross-sectional areas 13 543.2 Types of protective conductors . 15 543.3 Electrical continuity of protective conductors 16 543.4 PEN, PEL or PEM conductors 16 543.5 Combined protect

21、ive and functional earthing conductors 18 543.6 Currents in protective earthing conductors . 19 543.7 Reinforced protective earthing conductors for protective earthing conductor currents exceeding 10mA . 19 543.8 Arrangement of protective conductors 19 544 Protective bonding conductors . 19 544.1 Pr

22、otective bonding conductors for connection to the main earthing terminal 19 544.2 Protective bonding conductors for supplementary bonding . 20 Annex A (normative) Method for deriving the factor k in 543.1.2 (see also IEC 60724 and IEC 60949) . 21 Annex B (informative) Example of earthing arrangement

23、s and protective conductors . 25 Annex C (informative) Erection of concrete-embedded foundation earth electrodes . 27 Annex D (informative) Erection of soil-embedded earth electrodes . 30 Annex E (informative) List of notes concerning certain countries 34 Bibliography 40 Figure 54.1 Examples of a PE

24、N conductor connection . 18 Figure B.54.1 Examples of earthing arrangements for foundation earth electrode, protective conductors and protective bonding conductors . 26 Table 54.1 Minimum size of commonly used earth electrodes, embedded in soil or concrete used to prevent corrosion and provide mecha

25、nical strength 11 Table 54.2 Minimum cross-sectional area of protective conductors (where not calculated in accordance with 543.1.2) . 14 Table A.54.1 Value of parameters for different materials 21 Table A.54.2 Values of k for insulated protective conductors not incorporated in cables and not bunche

26、d with other cables . 22 Table A.54.3 Values of k for bare protective conductors in contact with cable covering but not bunched with other cables 22 60364-5-54 IEC:2011 3 Table A.54.4 Values of k for protective conductors as a core incorporated in a cable or bunched with other cables or insulated co

27、nductors . 23 Table A.54.5 Values of k for protective conductors as a metallic layer of a cable, e.g. armour, metallic sheath, concentric conductor, etc. . 24 Table A.54.6 Values of k for bare conductors where there is no risk of damage to any neighbouring material by the temperature indicated 24 Ta

28、ble D.54.1 Resistivity for types of soil 31 Table D.54.2 Variation of the resistivity for different types of soil . 31 4 60364-5-54 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE ELECTRICAL INSTALLATIONS Part 5-54: Selection and erection of electrical equipment Earthing arrangement

29、s and protective conductors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions conce

30、rning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Thei

31、r preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates c

32、losely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the rel

33、evant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the

34、 technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximu

35、m extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies pr

36、ovide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC o

37、r its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expen

38、ses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Atten

39、tion is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60364-5-54 has been prepared by IEC technical committee 64: Electrical i

40、nstallations and protection against electric shock. This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: clarification of the definition of protective conductor; im

41、proved specification of mechanical characteristics of the earth electrode; introduction of earth electrode for protection against electric shock and lighting protection; annexes describing concrete-embedded foundation earth electrodes and soil-embedded earth electrode. The text of this standard is b

42、ased on the following documents: 60364-5-54 IEC:2011 5 FDIS Report on voting 64/1755/FDIS 64/1766/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. It has the status of a basic safety publication in accordance with

43、 IEC Guide 104. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The readers attention is drawn to the fact that Annex E lists all of the “in-some-country“ clauses on differing practices of a less permanent nature relating to the subject of this standard. A list o

44、f all parts in the IEC 60364 series, under the general title: Low-voltage electrical installations, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.

45、ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60364-5-54 IEC:2011 INTRODUCTION Clause numbering is sequential, preceded by the number of this Part. Numbering of figures and tables takes

46、the number of this part followed by a sequential number, i.e. Table 54.1, 54.2, etc. Numbering of figures and tables in annexes takes the letter of the annex, followed by the number of the part, followed by a sequential number, e.g. A.54.1, A.54.2, etc. 60364-5-54 IEC:2011 7 LOW-VOLTAGE ELECTRICAL I

47、NSTALLATIONS Part 5-54: Selection and erection of electrical equipment Earthing arrangements and protective conductors 541 General 541.1 Scope This part of IEC 60364 addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety o

48、f the electrical installation. 541.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

49、applies. IEC 60364-4-41:2005, Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock IEC 60364-4-44:2007, Low-voltage electrical installations Part 4-44: Protection for safety Protection against voltage disturbances and electromagnetic disturbances IEC 60364-5-51:2005, Electrical installations of buildings Part 5-51: Se

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
  • FORD WSS-M1H692-D2-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的6 mm厚提花机织织物  与标准FORD WSS-M99P111.pdf FORD WSS-M1H692-D2-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD 6 mm TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的6 mm厚提花机织织物 与标准FORD WSS-M99P111.pdf
  • FORD WSS-M1H692-G-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物  与标准FORD WSS-M99P1111-A一.pdf FORD WSS-M1H692-G-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物 与标准FORD WSS-M99P1111-A一.pdf
  • FORD WSS-M1H692-H-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物  与标准FORD WSS-M99P1111-A一.pdf FORD WSS-M1H692-H-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物 与标准FORD WSS-M99P1111-A一.pdf
  • FORD WSS-M1H692-J-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物  与标准FORD WSS-M99P1111-A一.pdf FORD WSS-M1H692-J-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物 与标准FORD WSS-M99P1111-A一.pdf
  • FORD WSS-M1H692-K-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物  与标准FORD WSS-M99P1111-A一.pdf FORD WSS-M1H692-K-2008 FABRIC PHOENIX PATTERN WOVEN JACQUARD HFW TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H692-A)《凤凰(PHOENIX)图案的HFW提花机织织物 与标准FORD WSS-M99P1111-A一.pdf
  • FORD WSS-M1H693-A-2008 FABRIC HARO PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《HARO图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSS-M1H693-A-2008 FABRIC HARO PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《HARO图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSS-M1H693-B1-2008 FABRIC HARO PATTERN WOVEN JACQUARD 3 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《HARO图案的3 mm厚提花机织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSS-M1H693-A上》.pdf FORD WSS-M1H693-B1-2008 FABRIC HARO PATTERN WOVEN JACQUARD 3 mm - TO BE USED WITH FORD WSS-M99P1111-A 《HARO图案的3 mm厚提花机织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M1H693-A上》.pdf
  • FORD WSS-M1H693-B2-2008 FABRIC HARO PATTERN WOVEN JACQUARD 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  《HARO图案的6 mm厚提花机织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSS-M1H693-A上》.pdf FORD WSS-M1H693-B2-2008 FABRIC HARO PATTERN WOVEN JACQUARD 6 mm TO BE USED WITH FORD WSS-M99P1111-A 《HARO图案的6 mm厚提花机织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M1H693-A上》.pdf
  • FORD WSS-M1H693-C1-2008 FABRIC HARO PATTERN WOVEN JACQUARD 3 mm  TO BE USED WITH FORD WSS-M99P1111-A  《HARO图案的3 mm厚提花机织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSS-M1H693-A上》.pdf FORD WSS-M1H693-C1-2008 FABRIC HARO PATTERN WOVEN JACQUARD 3 mm TO BE USED WITH FORD WSS-M99P1111-A 《HARO图案的3 mm厚提花机织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M1H693-A上》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1