1、 IEC 60384-4-1 Edition 3.0 2007-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 4-1: Blank detail specification Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZ Condensateurs fixes utiliss dans les quipements
2、lectroniques Partie 4-1: Spcification particulire cadre Condensateurs fixes lectrolytiques laluminium, lectrolyte non solide Niveau dassurance EZ IEC 60384-4-1:2007 QC 300301 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specifi
3、ed, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about
4、IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre repro
5、duite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des
6、 droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Com
7、mission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
8、latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and re
9、placed publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of ele
10、ctronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your f
11、eedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et
12、publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou ame
13、ndement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les p
14、ublications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le prem
15、ier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: ww
16、w.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60384-4-1 Edition 3.0 2007-03 INTERNA
17、TIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 4-1: Blank detail specification Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZ Condensateurs fixes utiliss dans les quipements lectroniques Partie 4-1: Spcification part
18、iculire cadre Condensateurs fixes lectrolytiques laluminium, lectrolyte non solide Niveau dassurance EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE Q ICS 31.060.50 PRICE CODE CODE PRIX ISBN 2-8318-9903-6 QC 300301 Registered trademark of the International Ele
19、ctrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60384-4-1 IEC:2007 CONTENTS FOREWORD.3 1 General data 7 1.1 Recommended method(s) of mounting (to be inserted)7 1.2 Dimensions .7 1.3 Ratings and characteristics .7 1.4 Normative references 8 1.5 Marking .8 1.6
20、Ordering information8 1.7 Certified records of released lots.8 1.8 Additional information (not for inspection purposes) 8 1.9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification8 2 Inspection requirements .9 2.1 Procedures9 Table 1 Case
21、 size reference and dimensions .7 Table 2 Values of capacitance and of voltage related to case sizes .7 Table 3 Tangent of loss angle, impedance and rated ripple current8 Table 4 Other characteristics .8 Table 5 Test schedule for qualification conformance inspection .9 60384-4-1 IEC:2007 3 INTERNATI
22、ONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4-1: Blank detail specification Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization
23、for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publ
24、ishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
25、participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreeme
26、nt between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Pub
27、lications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or
28、 for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corres
29、ponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the la
30、test edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, wh
31、ether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
32、indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 6
33、0384-4-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This third edition cancels and replaces the second edition published in 2000 and constitutes a minor revision related to tables, figures and references. This bilingual version, published in 2
34、008, corresponds to the English version. 4 60384-4-1 IEC:2007 The text of this standard is based on the following documents: CDV Report on voting 40/1762/CDV 40/1820/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table
35、. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The French version of this standard has not been voted upon. The QC number that appears on the front cover of this publication is the specification number in the IEC Quality Assessment System for Electronic Compon
36、ents (IECQ). The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on
37、the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60384-4-1 IEC:2007 5 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4-1: Blank detail specif
38、ication Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZ Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specification
39、s. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications, the contents of 1.4 of the sectional specification shall be taken into account. The numbers
40、 between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification 1 The International Electrotechnical Commission or the National Standards Organization under whose authority the detail specificat
41、ion is drafted. 2 The IEC or National Standards number of the detail specification, data of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identificatio
42、n of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the detail specification in this position. 7 Outline drawing with main
43、dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment level. NOTE The asses
44、sment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional specification. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not change. 9 Reference data on the most imp
45、ortant properties, to allow comparison between the various capacitor types. 6 60384-4-1 IEC:2007 1 IEC 60384-4-1-XXX 2 QC 300301-XXX IEC 60384-4-1 4 QC 300301 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-4 3 Outline drawing: (see Table 1) ( angle projection) 7
46、FIXED ALUMINIUM ELECTROLYTIC 5 CAPACITORS WITH NON-SOLID ELECTROLYTE 6 (Other shapes are permitted within the dimensions given.) Assessment level(s): EZ 8 Performance grade: Information on the availability of components qualified to this detail specification is given in the IEC QC 001005. 9 60384-4-
47、1 IEC:2007 7 1 General data 1.1 Recommended method(s) of mounting (to be inserted) See 1.4.2 of IEC 60384-4. 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions mm Case size reference L H d NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions given
48、in Table 2, which then becomes Table 1. NOTE 2 The dimensions are given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Ta
49、ble 2) Climatic category Rated temperature Rated ripple current (see Table 3) Tangent of loss angle (see Table 3) NOTE Instead of the tangent of loss angle (tan ), the equivalent series resistance ESR may be specified in accordance with 4.3.3.2 of IEC 60384-4. Leakage current Impedance (if applicable) (see Table 3) Reverse voltage (if
