1、 IEC 60454-3-2 Edition 3.0 2006-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslink
2、ed adhesives Rubans adhsifs sensibles la pression usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 2: Exigences relatives aux rubans en polyester avec un adhsif en caoutchouc thermodurcissable, caoutchouc thermoplastique ou en acrylique rticul IEC 60454-3-2:2006-01(en-fr)
3、 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2006 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission
4、in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for furth
5、er information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit
6、national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919
7、02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technol
8、ogies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consu
9、lting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a v
10、ariety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Availab
11、le online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the Internati
12、onal Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publicati
13、ons of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est l
14、a premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez lditi
15、on la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Dispon
16、ible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publicati
17、ons remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnai
18、re en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary P
19、lus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc
20、Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60454-3-2 Edition 3.0 2006-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual mat
21、erials Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives Rubans adhsifs sensibles la pression usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 2: Exigences relatives aux rubans en polyester avec
22、 un adhsif en caoutchouc thermodurcissable, caoutchouc thermoplastique ou en acrylique rticul INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS 29.035.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1591-3 Registered trademark of the International Electrotechnical Co
23、mmission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60454-3-2:2006 IEC 2006 INTERNATIONAL EL
24、ECTROTECHNICAL COMMISSION _ PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives FOREWORD 1) The International Electrot
25、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To
26、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation
27、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (IS
28、O) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation f
29、rom all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be
30、held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any
31、 divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publica
32、tion. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, proper
33、ty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in th
34、is publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any o
35、r all such patent rights. International Standard IEC 60454-3-2 has been prepared by IEC technical committee 15: Insulating materials. This bilingual version (2014-05) corresponds to the English version, published in 2006-01. This third edition of IEC 60454-3-2 replaces the second edition, published
36、in 1998, and includes its consolidation with the text of IEC 60464-3-3 (1998). It constitutes a technical revision. IEC 60454-3-2:2006 IEC 2006 3 The text of this standard is based on the following documents: FDIS Report on voting 15/251/FDIS 15/278/RVD Full information on the voting for the approva
37、l of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will
38、 remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 4 IEC 60454-3-2:2006 IEC 2006 INTR
39、ODUCTION This International Standard is one of a series which deals with pressure-sensitive adhesive tapes, intended primarily for electrical purposes. The series consists of three parts: Part 1: General requirements (IEC 60454-1) Part 2: Methods of test (IEC 60454-2) Part 3: Specifications for indi
40、vidual materials (IEC 60454-3) This standard contains one of the sheets comprising part 3 as follows: Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives SAFETY WARNING It is the responsibility of the user of the methods con
41、tained or referred to in this standard to ensure that they are used in a safe manner. IEC 60454-3-2:2006 IEC 2006 5 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubb
42、er thermoplastic or acrylic crosslinked adhesives 1 Scope This sheet of IEC 60454-3 contains the requirements for: Polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives. Materials which conform to this specification meet established levels of performan
43、ce. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for
44、the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials IEC 60454-1:
45、1992, Specification for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements IEC 60454-2:1994, Specification for pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test 3 Terms and definitions For the purposes of this document, the definiti
46、ons of IEC 60454-1 apply. 4 Classification and designation 4.1 Polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives 4.1.1 The products supplied according to this specification shall be classified as follows: Type 1: Products having properties characte
47、ristic of a polyester film of nominal thickness 0,020 mm 0,030 mm preferably 0,023 mm (23 m) with a rubber thermosetting adhesive. 6 IEC 60454-3-2:2006 IEC 2006 Type 2: Products having properties characteristic of a polyester film of nominal thickness 0,020 mm 0,030 mm preferably 0,023 mm (23 m) wit
48、h an acrylic crosslinked adhesive. Type 3: Products having properties characteristic of a polyester film of nominal thickness 0,020 mm 0,030 mm preferably 0,023 mm (23 m) with a flame retardant acrylic crosslinked adhesive. Type 4: Products having properties characteristic of a polyester film of nom
49、inal thickness 0,045 mm 0,055 mm preferably 0,050 mm (50 m) with a rubber thermosetting adhesive. Type 5: Products having properties characteristic of a polyester film of nominal thickness 0,045 mm 0,055 mm preferably 0,050 mm (50 m) with an acrylic crosslinked adhesive. Type 6: Products having properties characteristic of a polyester film of nominal thickness 0,045 mm 0,055 mm prefera
