1、 IEC 60512-16-5Edition 1.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 16-5: Mechanical tests on contacts and terminations Test 16e: Gauge retention force (resilient contacts) Connecteurs pour quipements lectroniques Essais et mes
2、ures Partie 16-5: Essais mcaniques des contacts et des sorties Essai 16e: Force de rtention du calibre (contacts lastiques) IEC60512-16-5:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry
4、 about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque fo
5、rme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette
6、 publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading glo
7、bal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Pu
9、blished: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms con
10、taining more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or n
11、eed further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationale
12、s pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Cata
13、logue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces
14、. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au mon
15、de de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custs
16、erv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-16-5Edition 1.0 2008-07INTERNATIONAL STANDARD NORME INTERNATION
17、ALEConnectors for electronic equipment Tests and measurements Part 16-5: Mechanical tests on contacts and terminations Test 16e: Gauge retention force (resilient contacts) Connecteurs pour quipements lectroniques Essais et mesures Partie 16-5: Essais mcaniques des contacts et des sorties Essai 16e:
18、Force de rtention du calibre (contacts lastiques) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE EICS 31.220.10 PRICE CODECODE PRIXISBN 2-8318-9880-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechn
19、ique Internationale 2 60512-16-5 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-5: Mechanical tests on contacts and terminations Test 16e: Gauge retention force (resilient contacts) FOREWORD 1) The International Electrotechnica
20、l Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this en
21、d and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Comm
22、ittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in ac
23、cordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all
24、interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held res
25、ponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diverge
26、nce between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6)
27、 All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damag
28、e or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publi
29、cation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all su
30、ch patent rights. International Standard IEC 60512-16-5 has been prepared by subcommittee 48B, Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This standard cancels and replaces Test 16e of IEC 60512-8, issued in 1993. This
31、standard is to be read in conjunction with IEC 60512-1 and IEC 60512-1-100 which explains the structure of the IEC 60512 series. The text of this standard is based on the following documents: FDIS Report on voting 48B/1886/FDIS 48B/1919/RVD Full information on the voting for the approval of this sta
32、ndard can be found in the report on voting indicated in the above table. 60512-16-5 IEC:2008 3 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for electronic equipment Tests and measu
33、rements, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication
34、 will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60512-16-5 IEC:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-5: Mechanical tests on contacts and terminations Test 16e: Gauge retention force (resilient contacts) 1 Scope and object This part of I
35、EC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to determine the
36、holding capacity of contacts with resilient features by means of gauges. The test is also applicable to the grounding contact spring, and other similar contact systems, where the ability to retain a gauge is to be demonstrated. In these cases, the component detail specification shall contain suffici
37、ent detail, given under 5 d) to f), to enable the test to be done. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docu
38、ment (including any amendments) applies. IEC 60512-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation 3 Preparati
39、ons 3.1 Preparation of specimen The specimen shall consist of a connector with its terminations, and may be wired if so specified in the detail specification. If lubricant is specified for use with the contact system, it shall be applied in the manner specified in the detail specification. Any preco
40、nditioning given in the detail specification shall be applied. 3.2 Equipment Set(s) of gauges as specified in the detail specification, shall be provided. 3.3 Mounting If mounting of the specimen is appropriate, it shall be as specified in the detail specification. 60512-16-5 IEC:2008 5 4 Test metho
41、d 4.1 Method A individual contact gauges 4.1.1 Female contacts Each contact to be tested shall have the maximum size gauge specified inserted and withdrawn three times. After which, the minimum size retention force gauge specified shall be inserted. 4.1.2 Male contacts Each contact to be tested shal
42、l be inserted into and withdrawn from the minimum size gauge specified three times. After which, the contact shall be inserted into the maximum size retention force gauge specified. 4.2 Method B multiple contact gauges As for method A, except that contacts shall be tested in specified groups using g
43、auges having multiple contact engaging elements. After which appropriate individual maximum or minimum gauges shall be used. 4.3 Measurements and requirements 4.3.1 Before testing Visual examination according to IEC 60512-1-1 shall be carried out. 4.3.2 During testing Contacts shall support the weig
44、ht of the individual contact retention force gauge in the vertically downward direction. The gauge shall be maintained for 5 s minimum. 4.3.3 After testing Visual examination according to IEC 60512-1-1 shall be carried out. Special attention shall be given to the resilient features of the specimen.
45、5 Details to be specified When this test is required by a detail specification, the following shall be given therein: a) whether preconditioning is required; b) specification and means of application of any lubricant to be applied; c) whether the specimen is to be wired, and if so, details of this;
46、d) whether special mounting of the specimen is required; e) details of gauges to be used, including Surface Roughness according to ISO 1302; f) number of specimens to be tested; g) any deviation from the standard test method. _ 6 60512-16-5 CEI:2008 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CONNEC
47、TEURS POUR QUIPEMENTS LECTRONIQUES ESSAIS ET MESURES Partie 16-5: Essais mcaniques des contacts et des sorties Essai 16e: Force de rtention du calibre (contacts lastiques) AVANT-PROPOS 1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation compose de le
48、nsemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI entre autres activits publie des Normes interna
49、tionales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“). Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationa
