1、 IEC 60512-16-6Edition 1.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 16-6: Mechanical tests on contacts and terminations Test 16f: Robustness of terminations Connecteurs pour quipements lectroniques Essais et mesures Partie 16-6
2、: Essais mcaniques des contacts et des sorties Essai 16f: Robustesse des sorties IEC60512-16-6:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form o
3、r by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this
4、publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectron
5、ique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-ap
6、rs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishe
7、s International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Cat
8、alogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Sta
9、y up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definiti
10、ons in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Cu
11、stomer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llec
12、tronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.c
13、h/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_new
14、s/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il
15、 contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner
16、des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-16-6Edition 1.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Test
17、s and measurements Part 16-6: Mechanical tests on contacts and terminations Test 16f: Robustness of terminations Connecteurs pour quipements lectroniques Essais et mesures Partie 16-6: Essais mcaniques des contacts et des sorties Essai 16f: Robustesse des sorties INTERNATIONAL ELECTROTECHNICAL COMMI
18、SSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE EICS 31.220.10 PRICE CODECODE PRIXISBN 2-8318-9881-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60512-16-6 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _
19、CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-6: Mechanical tests on contacts and terminations Test 16f: Robustness of terminations FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotech
20、nical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications
21、, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, go
22、vernmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decision
23、s or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internati
24、onal use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
25、to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearl
26、y indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall
27、attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal
28、fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this public
29、ation. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60512-16-6 has been prepared by subcommittee 48B: Connect
30、ors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This standard cancels and replaces test 16f of IEC 60512-8, issued in 1993. This standard is to be read in conjunction with IEC 60512-1 and IEC 60512-1-100 which explains the structur
31、e of the IEC 60512 series. The text of this standard is based on the following documents: FDIS Report on voting 48B/1887/FDIS 48B/1920/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 60512-16-6 IEC:2008 3 This pu
32、blication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for electronic equipment Tests and measurements, can be found on the IEC website. The committee has decided that the contents of this publicat
33、ion will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60512-16-6 IEC:2008 CONN
34、ECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-6: Mechanical tests on contacts and terminations Test 16f: Robustness of terminations 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electrical connectors within the scope of IEC
35、 technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the ability of terminations to withstand the mechanical stresses likely to be applied during normal ass
36、embly operations. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 6051
37、2-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination IEC 60068-2-21:2006, Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices 3 Preparations 3.1 Preparation of specimen The spec
38、imen shall consist of a component with its terminations, and may be wired if so specified in the component detail specification. Any preconditioning given in the component detail specification shall be applied. 3.2 Mounting If mounting of the specimen is appropriate, it shall be as specified in the
39、component detail specification. 4 Test method 4.1 Procedure The test shall be carried out in accordance with the part or parts of test U of IEC 60068-2-21, as specified in the applicable detail specification. 60512-16-6 IEC:2008 5 4.2 Measurements and requirements 4.2.1 Before testing Visual examina
40、tion according to IEC 60512-1-1 shall be carried out. There shall be no defects, which would impair the validity of the test. 4.2.2 After testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects, other than any found under 3.2.1, that would impair the nor
41、mal functioning of the component. 5 Details to be specified When this test is required by a detail specification, the following details shall be specified: a) any preconditioning required; b) if the specimen is to be wired, if so details of this; c) if special mounting of the specimen is required; d
42、) number of specimens to be tested; e) any deviation from the standard test method. _ 6 60512-16-6 CEI:2008 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR QUIPEMENTS LECTRONIQUES ESSAIS ET MESURES Partie 16-6: Essais mcaniques des contacts et des sorties Essai 16f: Robustesse des sorti
43、es AVANT-PROPOS 1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de no
44、rmalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“).
45、 Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec
46、lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn
47、 que les Comits nationaux de la CEI intresss sont reprsents dans chaque comit dtudes. 3) Les Publications de la CEI se prsentent sous la forme de recommandations internationales et sont agres comme telles par les Comits nationaux de la CEI. Tous les efforts raisonnables sont entrepris afin que la CE
48、I sassure de lexactitude du contenu technique de ses publications; la CEI ne peut pas tre tenue responsable de lventuelle mauvaise utilisation ou interprtation qui en est faite par un quelconque utilisateur final. 4) Dans le but dencourager luniformit internationale, les Comits nationaux de la CEI sengagent, dans toute la mesure possible, appliquer de faon transparente les Publications de la CEI dans leurs publications nationales et rgionales. Toutes divergences entre toutes Publications de la CEI et toutes publications nationales ou rgionales correspondantes doivent tre indiques en termes cl
