IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf

上传人:livefirmly316 文档编号:1241292 上传时间:2019-08-25 格式:PDF 页数:54 大小:2MB
下载 相关 举报
IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf_第1页
第1页 / 共54页
IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf_第2页
第2页 / 共54页
IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf_第3页
第3页 / 共54页
IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf_第4页
第4页 / 共54页
IEC 60601-2-29-2008 Medical electrical equipment - Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医.pdf_第5页
第5页 / 共54页
点击查看更多>>
资源描述

1、 IEC 60601-2-29 Edition 3.0 2008-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Medical electrical equipment Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators Appareils lectromdicaux Partie 2-29: Exigences particulires pour la scurit de base

2、 et les performances essentielles des simulateurs de radiothrapie IEC 60601-2-29:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means

3、, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, p

4、lease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniq

5、ue, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contacte

6、z le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internationa

7、l Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC

8、publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date o

9、n all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English

10、 and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service

11、 Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et au

12、x technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cu

13、r_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Rest

14、ez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus

15、 de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentair

16、es sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60601-2-29 Edition 3.0 2008-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Medical electrical equipment Part 2-29: Particular

17、requirements for the basic safety and essential performance of radiotherapy simulators Appareils lectromdicaux Partie 2-29: Exigences particulires pour la scurit de base et les performances essentielles des simulateurs de radiothrapie INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHN

18、IQUE INTERNATIONALE T ICS 11.040.60 PRICE CODE CODE PRIX ISBN 2-8318-9854-4 2 60601-2-29 IEC:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 201.1 Scope, object and related standards .6 201.2 Normative references7 201.3 Terms and definitions8 201.4 General requirements8 201.5 General requirements for testin

19、g of ME EQUIPMENT.8 201.6 Classification of ME EQUIPMENT and ME SYSTEMS8 201.7 ME EQUIPMENT identification, marking and documents9 201.8 Protection against electrical HAZARDS from ME EQUIPMENT11 201.9 Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS11 201.10 Protection against un

20、wanted and excessive radiation HAZARDS18 201.11 Protection against excessive temperatures and other HAZARDS18 201.12 Accuracy of controls and instruments and protection against hazardous outputs19 201.13 HAZARDOUS SITUATIONS and fault conditions.19 201.14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEM

21、S) .19 201.15 Construction of ME EQUIPMENT .19 201.16 ME SYSTEMS 19 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS .19 Annex C (informative) Guide to marking and labelling requirements for ME EQUIPMENT and ME SYSTEMS20 Annex AA (informative) Particular guidance and rationale21 B

22、ibliography22 Index of defined terms used in this particular standard23 Figure 101 Equipment movements and scales Rotary GANTRY with identification of axes 1 to 8, directions 9 to 13, and dimensions 14 and 15 (see accompanying table) .14 Figure 102 Equipment movements and scales ISOCENTRIC RADIOTHER

23、APY SIMULATOR or TELERADIOTHERAPY ME EQUIPMENT, with identification of axes 1; 4 to 6; 19, of directions 9 to 12; 16 to 18 and of dimensions 14; 15 (see accompanying table)15 Figure 103 Equipment movements and scales View from RADIATION SOURCE of TELERADIOTHERAPY RADIATION FIELD or RADIOTHERAPY SIMU

24、LATOR DELINEATED RADIATION FIELD (see accompanying table) 16 Table 201.101 Description of equipment movements .17 Table 201.C.101 ACCOMPANYING DOCUMENTS, General .20 Table 201.C.102 ACCOMPANYING DOCUMENTS, Instructions for use20 Table 201.C.103 ACCOMPANYING DOCUMENTS, technical description20 60601-2

25、-29 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEDICAL ELECTRICAL EQUIPMENT Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standar

26、dization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Inter

27、national Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate

28、 in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between

29、the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications h

30、ave the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mi

31、sinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nat

32、ional or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest editio

33、n of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direc

34、t or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensab

35、le for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International standard IEC 60601-2-29 h

36、as been prepared by IEC subcommittee 62C: Equipment for radiotherapy, nuclear medicine and radiation dosimetry, of IEC technical committee 62: Electrical equipment in medical practice. This third edition cancels and replaces the second edition published in 1999. This edition constitutes a technical

37、revision, which brings this standard in line with the third edition of IEC 60601-1 and its collateral standards. The text of this particular standard is based on the following documents: CDV Report on voting 62C/423/CDV 62C/434/RVC Full information on the voting for the approval of this particular s

38、tandard can be found in the report on voting indicated in the above table. 4 60601-2-29 IEC:2008 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: Requirements and definitions: roman type. Test specifications: i

39、talic type. Informative material appearing outside of tables, such as notes, examples and references: in smaller type. Normative text of tables is also in a smaller type. TERMS DEFINED IN CLAUSE 3 OF THE GENERAL STANDARD, IN THIS PARTICULAR STANDARD OR AS NOTED: SMALL CAPITALS. In referring to the s

40、tructure of this standard, the term “clause” means one of the seventeen numbered divisions within the table of contents, inclusive of all subdivisions (e.g. Clause 7 includes subclauses 7.1, 7.2, etc.); “subclause” means a numbered subdivision of a clause (e.g. 7.1, 7.2 and 7.2.1 are all subclauses

41、of Clause 7). References to clauses within this standard are preceded by the term “Clause” followed by the clause number. References to subclauses within this particular standard are by number only. In this standard, the conjunctive “or” is used as an “inclusive or” so a statement is true if any com

42、bination of the conditions is true. The verbal forms used in this standard conform to usage described in Annex H of the ISO/IEC Directives, Part 2. For the purposes of this standard, the auxiliary verb: “shall” means that compliance with a requirement or a test is mandatory for compliance with this

43、standard; “should” means that compliance with a requirement or a test is recommended but is not mandatory for compliance with this standard; “may” is used to describe a permissible way to achieve compliance with a requirement or test. An asterisk (*) as the first character of a title or at the begin

44、ning of a paragraph or table title indicates that there is guidance or rationale related to that item in Annex A. A list of all parts of the IEC 60601 series, published under the general title: Medical electrical equipment, can be found on the IEC website. The committee has decided that the contents

45、 of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60601-2-2

46、9 IEC:2008 5 INTRODUCTION This particular standard establishes requirements to be complied with by MANUFACTURERS in the design and construction of RADIOTHERAPY SIMULATORS; it does not attempt to define their optimum performance requirements. Its purpose is to identify those features of design that a

47、re regarded, at the present time, as essential for the safe operation of such ME EQUIPMENT. It places limits on the degradation of ME EQUIPMENT performance beyond which it can be presumed that a fault condition exists, for example a component failure, and where an INTERLOCK then operates to prevent

48、continued operation of the ME EQUIPMENT. 6 60601-2-29 IEC:2008 MEDICAL ELECTRICAL EQUIPMENT Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators 201.1 Scope, object and related standards Clause 1 of the general standard 1)applies, except as fol

49、lows: 201.1.1 Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of RADIOTHERAPY SIMULATORS, hereafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or s

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1