1、 IEC 61073-1 Edition 4.0 2009-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic specification Dispositifs dinterconnexion et composants passifs fibres
2、 optiques Protecteurs dpissures mcaniques et dpissures par fusion pour fibres et cbles optiques Partie 1: Spcification gnrique IEC 61073-1:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、 may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquir
4、y about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque f
5、orme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cett
6、e publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Com
7、mission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
8、latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects
9、, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online
10、 dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish
11、to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui
12、 a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherch
13、e de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webst
14、ore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et
15、 lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des comm
16、entaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61073-1 Edition 4.0 2009-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables
17、 Part 1: Generic specification Dispositifs dinterconnexion et composants passifs fibres optiques Protecteurs dpissures mcaniques et dpissures par fusion pour fibres et cbles optiques Partie 1: Spcification gnrique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R
18、 ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-83220-592-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vou
19、s assurer que vous avez obtenu cette publication via un distributeur agr. 2 61073-1 IEC:2009 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references 5 3 Terms and definitions . 6 4 Requirements . 7 4.1 Classification . 7 4.1.1 Type 8 4.1.2 Arrangement 8 4.1.3 Style 8 4.1.4 Variant . 9 4.1.5 Assessm
20、ent level . 10 4.1.6 Normative reference extensions . 10 4.2 Documentation 11 4.2.1 Symbols. 11 4.2.2 Specification system 11 4.2.3 Drawings . 13 4.2.4 Performance 13 4.2.5 Measurements . 13 4.2.6 Test reports . 13 4.2.7 Instructions for use 14 4.3 Standardisation system 14 4.3.1 Performance standar
21、ds 14 4.3.2 Reliability standards . 14 4.3.3 Interlinking . 15 4.4 Design and construction 16 4.4.1 Materials 16 4.4.2 Workmanship 16 4.5 Performance 17 4.6 Identification and marking 17 4.6.1 Variant identification number 17 4.6.2 Component marking . 17 4.6.3 Package marking . 17 4.7 Packaging . 18
22、 4.8 Storage conditions . 18 4.9 Safety 18 Figure 1 Standardisation structure 16 Table 1 Example of a typical mechanical splice and fusion splice protection hardware . 8 Table 2 Three-level specification structure 12 Table 3 Standards interlink matrix 16 61073-1 IEC:2009 3 INTERNATIONAL ELECTROTECHN
23、ICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization com
24、prising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Sta
25、ndards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this pre
26、paratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two orga
27、nizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form
28、 of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretat
29、ion by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or reg
30、ional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this pu
31、blication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirec
32、t, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the c
33、orrect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61073-1 has been prepare
34、d by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the third edition published in 1999. This edition constitutes a technical revision. The main changes with respect to the previous e
35、dition are as follows: terms and definitions have been reconsidered; style has been added in classification of requirement; environmental category has been deleted from classification of requirement; standardisation structure and standards interlink have been reconsidered. 4 61073-1 IEC:2009 This bi
36、lingual version (2013-01) corresponds to the monolingual English version, published in 2009-01. The text of this standard is based on the following documents: FDIS Report on voting 86B/2773/FDIS 86B/2805/RVD Full information on the voting for the approval of this standard can be found in the report
37、on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result
38、 date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61073-1 IEC:2009 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS ME
39、CHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES Part 1: Generic specification 1 Scope This part of IEC 61073 applies to fibre optic splice hardware (mechanical splices and fusion splice protections) for optical fibres and cables. It includes: fibre optic splice hardware r
40、equirements; quality assessment procedures. This standard does not cover test and measurement procedures, which are described in IEC 61300-1, IEC 61300-2 series and IEC 61300-3 series. 2 Normative references The following referenced documents are indispensable for the application of this document. F
41、or dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. References made to a specific clause or subclause of a standard include all subclauses of the reference unless otherwise specified. IEC QC 00
42、1002-3, IEC Quality Assessment System for Electronic Components (IECQ) Rules of Procedure Part 3: Approval procedures IEC Guide 102, Electronic components Specification structures for quality assessment (Qualification approval and capability approval) IEC 60027 (all parts), Letter symbols to be used
43、 in electrical technology IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60617 (all parts), Graphical symbols for diagrams IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangeme
44、nt and guidance IEC 60793-1 (all parts), Optical fibres Measurement methods and test procedures IEC 60825-1, Safety of laser products Part 1: Equipment classification and requirements IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1
45、: General and guidance 6 61073-1 IEC:2009 IEC 61300-2 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2: Tests IEC 61300-3 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures
46、Part 3: Examinations and measurements IEC 61930: Fibre optic graphical symbology IEC 61931, Fibre optic Terminology ISO 129-1, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, ISO system of limits and fits Part 1: Bases of tolerances, deviations and fi
47、ts ISO 1101, Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times 3 Terms and definitions For the purposes of this document, the
48、 terms and definitions contained in IEC 60050-731, IEC 61931, and IEC 60874-1 as well as the following definitions apply. 3.1 cable joint protective joint of two or more optical fibre cables. It may consist of fibre splices, organizers and closures 3.2 capillary mechanical splice mechanical splice w
49、here the fibres are aligned by inserting them in a precision capillary tube 3.3 fibre splice permanent or separable splice (see separable splice) 3.4 fusion splice splice in which fibre ends are joined in a permanent manner by means of fusion 3.5 hybrid splice cable splice with fibre splice(s) and electrical conductor splice(s) 3.6 interchangeable splice set
