1、 IEC 61915-2 Edition 1.0 2011-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 2: Root device profiles for starters and similar equipment Appareillage basse tension Profils dappareil pour les appareils industr
2、iels mis en rseau Partie 2: Profils racines dappareil pour les dmarreurs et les matriels similaires IEC 61915-2:2011 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be repro
3、duced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtai
4、ning additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce s
5、oit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication
6、, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organiza
7、tion that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment
8、 might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www
9、.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more
10、 than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further
11、assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout
12、ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des pu
13、blications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Publi
14、shed CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes
15、 lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.
16、htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61915-2 Edition 1.0 2011-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-volta
17、ge switchgear and controlgear Device profiles for networked industrial devices Part 2: Root device profiles for starters and similar equipment Appareillage basse tension Profils dappareil pour les appareils industriels mis en rseau Partie 2: Profils racines dappareil pour les dmarreurs et les matrie
18、ls similaires INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 29.130.20 PRICE CODE CODE PRIX ISBN 978-2-88912-763-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colour in
19、side 2 61915-2 IEC:2011 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions and abbreviated terms . 6 3.1 General . 6 3.2 Terms and definitions 6 3.3 Abbreviated terms . 9 4 Root device profiles 9 5 Common elements of the root device profile . 11 5.1 R
20、parameters 11 5.2 RW parameters . 17 5.3 Parameter groups 20 5.4 State model . 22 5.4.1 Motor starter 22 5.4.2 Soft starter 24 5.4.3 Motor management starter . 24 6 Root device profiles 27 6.1 Assemblies supported . 27 6.2 Motor starter . 28 6.3 Soft starter 31 6.4 Motor management starter 33 7 Test
21、s 35 Bibliography 36 Figure 1 State chart diagram of motor starter . 22 Figure 2 State chart diagram of motor management starter 24 Table 1 List of root device profiles . 9 Table 2 R parameters 11 Table 3 RW parameters . 17 Table 4 Parameters groups 20 Table 5 State transition table of motor starter
22、 23 Table 6 State transition table of motor management starter . 25 Table 7 P(IEC 61915-2)00001 28 Table 8 P(IEC 61915-2)00002 31 Table 9 P(IEC 61915-2)00003 33 61915-2 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR DEVICE PROFILES FOR NETWORKED INDUSTR
23、IAL DEVICES Part 2: Root device profiles for starters and similar equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote i
24、nternational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (here
25、after referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also par
26、ticipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible,
27、an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While al
28、l reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to ap
29、ply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of
30、 conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this pu
31、blication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirec
32、t, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the c
33、orrect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61915-2 has been prepare
34、d by the subcommittee 17B: Low-voltage switchgear and controlgear, of the IEC technical committee 17: Switchgear and controlgear. The text of this standard is based on the following documents: FDIS Report on voting 17B/1752/FDIS 17B/1755/RVD Full information on the voting for the approval of this st
35、andard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61915-2 IEC:2011 A list of all parts of the IEC 61915 series can be found, under the general title Low-voltage switchgear and controlgear D
36、evice profiles for networked industrial devices, on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this dat
37、e, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should theref
38、ore print this document using a colour printer. 61915-2 IEC:2011 5 INTRODUCTION This International Standard follows the rules and uses the framework of IEC 61915-1, Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 1: General rules for the development of de
39、vice profiles. This International Standard is to define the common set of functionality (data and behaviour) for motor starters and similar devices thereby allowing system designers, system integrators and maintenance personnel to handle profile-based devices without a special tool configuration. Th
40、is International Standard gives manufacturers and other organizations the common set of functionality to represent their network capable devices. Manufacturers or other organizations may use the root device profiles specified to add their manufacturer-specific extensions. 6 61915-2 IEC:2011 LOW-VOLT
41、AGE SWITCHGEAR AND CONTROLGEAR DEVICE PROFILES FOR NETWORKED INDUSTRIAL DEVICES Part 2: Root device profiles for starters and similar equipment 1 Scope This part of IEC 61915 specifies root device profiles as defined by IEC 61915-1 for starters and similar equipment covered by the following product
42、standards: electromechanical contactors and motor-starters (IEC 60947-4-1), AC semiconductor motor controllers and starters (IEC 60947-4-2), AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3), control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2),
43、 control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lat
44、est edition of the referenced document (including amendments) applies. IEC 60947-1:2007, Low-voltage switchgear and controlgear Part 1: General rules Amendment 1 (2010) IEC 61915-1:2007, Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 1: General rules for
45、 the development of device profiles 3 Terms, definitions and abbreviated terms 3.1 General For the purposes of this document, the terms, definitions, abbreviations and symbols given in IEC 61915-1, as well as the following apply. 3.2 Terms and definitions 3.2.1 built-in thermal protection protection
46、 of certain parts (called protected parts) of a rotating electrical machine against excessive temperatures resulting from certain conditions of thermal overload, achieved by means of a thermal protection system, the whole or part of which is a thermally sensitive device (thermal detector or protecto
47、r) incorporated within the machine IEC 60947-8:2003, 3.1.1, modified 3.2.2 thermal protection system system intended to ensure the built-in thermal protection of a rotating electrical machine by means of a thermal detector (or thermal detectors) together with a control system, or by means of a therm
48、al protector (or thermal protectors) 61915-2 IEC:2011 7 IEC 60947-8:2003, 3.1.2, modified 3.2.3 thermal detector electrical insulated device (component), sensitive to temperature only, which will initiate a switching function in the control system when its temperature reaches a predetermined level I
49、EC 60947-8:2003, 3.1.3 3.2.4 control system system to translate a particular point on the characteristic of a thermal detector to a switching function on the supply to the rotating electrical machine NOTE The system is capable of being reset (either manually or automatically) when the temperature falls to the reset value. IEC 60947-8:2003, 3.1.5 3.2.5 contr
