1、 IEC 62150-3 Edition 2.0 2015-05 INTERNATIONAL STANDARD Fibre optic active components and devices Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces IEC 62150-3:2015-05(en) colour inside THIS PUBLICATION
2、 IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from e
3、ither IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. I
4、EC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electri
5、cal, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue Th
6、e stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enab
7、les to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all
8、 new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional lan
9、guages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have be
10、en collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62150-3 Edition 2.0 2015-05 INTERNA
11、TIONAL STANDARD Fibre optic active components and devices Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.180.20 ISBN 978-2-8322-2670-4 Registered trad
12、emark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 62150-3:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 6 3.1 Terms and def
13、initions 6 3.2 Abbreviations 7 4 Measurement consideration . 7 4.1 Multiple test methods 7 4.2 Two wiggle loss mechanisms 7 Rationale for two different wiggle loss test methods . 7 4.2.1Case A: Point of action for the ferrule 7 4.2.2Case B: Point of action for the plug housing 8 4.2.3 5 Test Method
14、A . 8 5.1 Apparatus . 8 General . 8 5.1.1Test cord . 8 5.1.2Power meter 8 5.1.3Test load . 8 5.1.4 5.2 Test procedures for Tx interfaces 9 Test procedures . 9 5.2.1Set-up . 9 5.2.2Initial measurement . 9 5.2.3Apply load and rotate . 9 5.2.4Wiggle loss 9 5.2.5 5.3 Test procedures for Rx interfaces an
15、d optical receptors 10 Test procedures . 10 5.3.1LOS indicator method 10 5.3.2Receiver optical power monitor method . 10 5.3.3 6 Test Method B . 11 6.1 Apparatus . 11 General . 11 6.1.1Test fixture and rotation mechanism 11 6.1.2Test cord . 11 6.1.3Power meter 12 6.1.4Test load . 12 6.1.5 6.2 Test p
16、rocedures for Tx interfaces 12 Test procedures . 12 6.2.1Set-up . 12 6.2.2Initial measurement . 12 6.2.3Apply load . 12 6.2.4Measurement . 12 6.2.5Wiggle loss 12 6.2.6 6.3 Test procedures for Rx interfaces and optical receptors 13 Test procedures . 13 6.3.1LOS-indicator method 13 6.3.2Receiver optic
17、al power monitor method . 13 6.3.3IEC 62150-3:2015 IEC 2015 3 7 Test results . 14 Annex A (normative) Load requirements 15 A.1 Loads for Method A . 15 A.2 Loads for Method B . 15 Annex B (normative) Summary of test conditions . 16 Annex C (normative) Characteristics of the test cord 17 Annex D (norm
18、ative) Floating tolerance . 20 Annex E (informative) Load value difference for connector type in Method A . 21 Bibliography 22 Figure 1 Equipment setup of Method A for Tx interfaces 10 Figure 2 Equipment set-up of Method A for Rx interfaces and optical receptors . 11 Figure 3 Equipment set-up of Met
19、hod B for Tx interfaces . 13 Figure 4 Equipment set-up of Method B for Rx interface and optical receptors . 14 Figure C.1 Wiggle test cord interface (LC connector) . 17 Figure C.2 Wiggle test cord interface (SC connector) . 18 Figure D.1 Floating tolerance . 20 Figure E.1 Floating tolerance . 21 Tab
20、le 1 Multiple test methods 7 Table A.1 Method A: Loads applied for devices using connector cords with 1,25 mm ferrule and 2,5 mm ferrule . 15 Table A.2 Method B: Loads applied for devices using connector cords with 1,25 mm ferrule and 2,5 mm ferrule . 15 Table B.1 Summary of test conditions for Meth
21、od A (normative) 16 Table B.2 Summary of test conditions for Method B (normative) 16 Table C.1 Wiggle test cord specification (LC connector) 17 Table C.2 Dimensions of the wiggle test cord interface 18 Table C.3 Wiggle test cord specification (SC connector) 18 Table C.4 Dimensions of the wiggle test
22、 cord interface 19 4 IEC 62150-3:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES TEST AND MEASUREMENT PROCEDURES Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces FOREWORD 1) The Int
23、ernational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and ele
24、ctronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committ
25、ees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
26、Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee h
27、as representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accur
28、ate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regiona
29、l publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in so
30、me areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents
31、including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or
32、reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of t
33、he elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62150-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: F
34、ibre optics. This second edition cancels and replaces the first edition published in 2012 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: extension of application field to SC connector interface transceiver
35、s in addition to LC connector interface transceivers specified in the first edition as both transceiver interfaces are very important in the industry; addition of a new Annex E dealing with load value difference for connector type in Method A. IEC 62150-3:2015 IEC 2015 5 The text of this standard is
36、 based on the following documents: FDIS Report on voting 86C/1311/FDIS 86C/1330/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
37、 A list of all parts in the IEC 62150 series, published under the general title Fibre optic active components and devices Test and measurement procedures, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date i
38、ndicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The co
39、lour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 62150-3:2015 IEC 2015 FIBRE OPTIC ACTIVE COMPONENTS AND
40、DEVICES TEST AND MEASUREMENT PROCEDURES Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces 1 Scope It has been found that some optical transceivers and receptacles are susceptible to fibre optic cable induced stress when side forces ar
41、e applied to the mated cable-connector assembly, resulting in variations in the transmitted optical power. The purpose of this part of IEC 62150 is to define physical stress tests to ensure that such optical connections (cable and receptacle) can continue to function within specifications. This stan
42、dard specifies the test requirements and procedures for qualifying optical devices for sensitivity to coupled power variations induced by mechanical disturbance at the optical ports of the device. This standard applies to active devices with optical receptacle interfaces. This standard describes the
43、 testing of transceivers for use with single-mode connectors having either 2,5 mm or 1,25 mm ferrules. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci
44、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61753 (all parts), Fibre optic interconnecting devices and passive components performance standard IEC 61753-021-6, Fibre optic interconnecting devices and passive components pe
45、rformance standard Part 021-6: Grade B/2 single-mode fibre optic connectors for category O Uncontrolled environment IEC 61754 (all parts), Fibre optic interconnecting devices and passive components Fibre optic connector interfaces 3 Terms, definitions and abbreviations 3.1 Terms and definitions For
46、the purposes of this document, the following terms and definitions apply. 3.1.1 wiggle mechanical disturbances that induce coupled optical power variation in the optical receptacle and transceiver interface IEC 62150-3:2015 IEC 2015 7 3.1.2 wiggle loss variation in coupled output power (with respect
47、 to a no-load, non-rotated measurement) induced in an optical module or receptacle when the mated connector is laterally stressed 3.2 Abbreviations DUT device under test LOS loss of signal Rx receiver Tx transmitter 4 Measurement consideration 4.1 Multiple test methods Since the wiggle loss mechanis
48、ms are categorized into two different cases, Case A and B, this standard defines two measurement methods, Method A and B, as shown in Table 1. Method A and B are applicable to the tests for the mechanical endurance of transceivers under wiggle Case A and B, respectively. Table 1 Multiple test method
49、s Test methods Applicable to Example of parameters to be included Method A Wiggle Case A: test for optical transceivers use with patchcord terminated to connectors which meet interface standards (IEC 61754 series) Test procedure, test fixture, test jumper, test load Method B Wiggle Case B: test for optical transceivers use with patchcord terminated to connectors which meet both interface standards (IEC 61754 series) and performance standards (IEC 61753 serie
