1、 IEC 62822-3 Edition 1.0 2017-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric welding equipment Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Part 3: Resistance welding equipment Matriels de soudage lectrique valuation des restrictions relat
2、ives lexposition humaine aux champs lectromagntiques (0 Hz 300 GHz) Partie 3: Matriels de soudage par rsistance IEC 62822-3:2017-09(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this pu
3、blication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have
4、an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous
5、quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur c
6、ette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Co
7、mmission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
8、 latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Availa
9、ble for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC J
10、ust Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical term
11、s containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted
12、from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistanc
13、e, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A prop
14、os des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignement
15、s bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en util
16、isant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publ
17、ications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues addi
18、tionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines ent
19、res antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62822-3 Edition 1.0 2017-09 INTERNATIONAL STANDARD NORME
20、INTERNATIONALE Electric welding equipment Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Part 3: Resistance welding equipment Matriels de soudage lectrique valuation des restrictions relatives lexposition humaine aux champs lectromagntiques (0 Hz 300
21、 GHz) Partie 3: Matriels de soudage par rsistance INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 25.160.30 ISBN 978-2-8322-4814-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internation
22、ale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 62822-3:2017 IEC 2017 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, defin
23、itions, quantities, units and constants . 8 3.1 Terms and definitions 8 3.2 Quantities and units 9 3.3 Constants . 10 4 Requirements 10 5 Coupling coefficients . 10 5.1 General . 10 5.2 Conductive disks . 12 5.3 Anatomical body models for numerical calculations . 14 6 Source model 14 6.1 General . 1
24、4 6.2 Single cable 15 6.3 Parallel cables 15 6.4 Rectangular loop . 16 7 Assessment methods . 18 7.1 General . 18 7.2 General considerations . 18 7.2.1 Time averaging 18 7.2.2 Spatial averaging . 18 7.2.3 Frequency range limitations . 18 7.2.4 Measurement instruments 19 7.2.5 Uncertainty of assessme
25、nt . 19 7.3 Equipment with sinusoidal welding current 19 7.4 Equipment with pulsed or non-sinusoidal welding current 20 7.4.1 General . 20 7.4.2 Derivation of the weighting function from limits for field quantities . 20 7.4.3 Application of the weighted peak method in the frequency domain . 22 7.4.4
26、 Application of the weighted peak method in the time domain . 23 7.5 Method based on measuring of external field levels 23 7.5.1 General . 23 7.5.2 Measurement equipment . 23 7.5.3 Spatial averaging . 24 7.5.4 Exposure of the head . 24 7.5.5 Exposure of the trunk 25 7.5.6 Exposure of the limbs 25 7.
27、6 Assessment procedure 26 7.6.1 General . 26 7.6.2 Power-source 27 7.6.3 Electrode-assembly . 27 7.6.4 Welding-system . 27 8 EMF data sheet and assessment report . 28 8.1 General . 28 8.2 EMF datasheet of components 28 IEC 62822-3:2017 IEC 2017 3 8.2.1 Power sources . 28 8.2.2 Electrode assemblies .
28、 29 8.2.3 Other components . 29 Annex A (informative) Example of the weighted peak method in the time domain . 30 A.1 General . 30 A.2 Power source 30 A.2.1 General . 30 A.2.2 Applied limits . 30 A.2.3 Assessment of the electrode-assembly 32 A.2.4 Datasheets 33 Annex B (informative) Example of the w
29、eighted peak method in the frequency domain 37 B.1 General . 37 B.2 Power source 37 B.2.1 General . 37 B.2.2 Applied limits . 38 B.2.3 Assessment of the electrode-assembly 40 B.2.4 Datasheets 41 Annex C (informative) IEC 62822-3 for users of IEC 62822-2 . 45 Annex D (informative) Coupling coefficien
30、ts for common arrangements . 47 D.1 Single wire 47 D.2 Example of standardized loop configurations 48 D.2.1 0,5 m 0,5 m 48 D.2.2 1,0 m 1,0 m 50 D.2.3 1,0 m 1,5 m 52 Annex E (informative) Conservative approximation of coupling coefficients for rectangular loops 54 E.1 General . 54 E.2 XY-plane . 54 E
31、.3 Z-direction 55 E.4 Correlation factors 56 Annex F (informative) Example EMF datasheets 57 F.1 Example datasheet Welding system . 57 F.2 Example datasheet Power source 59 F.3 Example datasheet Electrode assembly . 60 Bibliography 61 Figure 1 Example of a reference system 11 Figure 2 Conducting dis
32、k in a uniform, time variant magnetic flux density . 12 Figure 3 Electrical conductivity for homogeneous body models 13 Figure 4 Example of the placement of the conductive disks. 13 Figure 5 Source model Single cable 15 Figure 6 Assessment configuration Single cable . 15 Figure 7 Source model Parall
33、el cables 15 Figure 8 Assessment Configuration Parallel Cables 16 Figure 9 Rectangular loop configuration . 16 Figure 10 Assessment distances for the loop configuration . 17 Figure 11 Piecewise linear and approximated limit amplitudes . 21 4 IEC 62822-3:2017 IEC 2017 Figure 12 Piecewise linear and a
34、pproximated summation function phase angles 22 Figure 13 Field measurement at head position . 24 Figure 14 Field measurement at trunk position . 25 Figure 15 Field measurement at limb positions, hand and thigh . 26 Figure 16 Assessment of a complete welding system . 27 Figure 17 Typical component ba
35、sed assessment . 27 Figure A.1 Current waveform . 30 Figure A.2 Combined ELVs for the head 1 . 31 Figure A.3 Unity-coupling waveform . 31 Figure A.4 Geometry of the electrode assembly . 32 Figure A.5 Datasheet of the power source . 33 Figure A.6 Datasheet of the electrode assembly 34 Figure A.7 Data
36、sheet of the welding system 35 Figure A.8 Datasheet of the welding system 36 Figure B.1 Current waveform . 37 Figure B.2 Spectrum of the current waveform 38 Figure B.3 Combined ELVs for the head 1 . 39 Figure B.4 Unity-coupling waveform . 39 Figure B.5 Geometry of the electrode assembly . 40 Figure
37、B.6 Datasheet of the power source . 41 Figure B.7 Datasheet of the electrode assembly 42 Figure B.8 Datasheet of the welding system 43 Figure B.9 Datasheet of the welding system 44 Figure E.1 Geometry of the electrode assembly XY-plane 54 Figure E.2 Geometry of the electrode assembly Z-direction . 5
38、5 Figure F.1 Example datasheet Welding system . 57 Figure F.2 Example datasheet Power source 59 Figure F.3 Example datasheet Power source 60 Table 1 Standardized distances . 11 Table 2 Radii for the 2D disk model . 13 Table D.1 Coupling coefficients Single wire . 47 Table D.2 Coupling coefficients X
39、Y-plane Loop 0,5 m 0,5 m 48 Table D.3 Coupling coefficients XY-plane Loop 0,5 m 0,5 m 49 Table D.4 Coupling coefficients XY-plane Loop 1,0 m 1,0 m 50 Table D.5 Coupling coefficients Z-plane Loop 1,0 m 1,0 m . 51 Table D.6 Coupling coefficients XY-plane Loop 1,0 m 1,5 m 52 Table D.7 Coupling coeffici
40、ents Z-plane Loop 1,0 m 1,5 m . 53 Table E.1 Correlation factors XY . 56 Table E.2 Correlation factors Z . 56 IEC 62822-3:2017 IEC 2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC WELDING EQUIPMENT ASSESSMENT OF RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 Hz TO 300
41、 GHz) Part 3: Resistance welding equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
42、questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publica
43、tion(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC
44、 collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opi
45、nion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to
46、ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparentl
47、y to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certific
48、ation bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirec
