1、 IEC 63044-5-1 Edition 1.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC requirements, conditions and test set-up Systmes Electroniques pour les Foyers Domestiques et les Btiments (HBES
2、) et Systmes de Gestion Technique du Btiment (SGTB) Partie 5-1: CEM Exigences gnrales, condition et montage dessais IEC 63044-5-1:2017-01(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of t
3、his publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or
4、 have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise
5、 sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires
6、 sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechni
7、cal Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you ha
8、ve the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents.
9、Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications.
10、 IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrica
11、l terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extr
12、acted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further ass
13、istance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes.
14、A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseig
15、nements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC e
16、n utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelle
17、s publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langue
18、s additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certain
19、es entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 63044-5-1 Edition 1.0 2017-01 INTERNATIONAL STANDAR
20、D NORME INTERNATIONALE Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC requirements, conditions and test set-up Systmes Electroniques pour les Foyers Domestiques et les Btiments (HBES) et Systmes de Gestion Technique du Btiment (SGTB) Part
21、ie 5-1: CEM Exigences gnrales, condition et montage dessais INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.120.01; 29.120.99 ISBN 978-2-8322-3900-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electro
22、technique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 63044-5-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7
23、 2 Normative references 7 3 Terms, definitions and abbreviated terms 8 3.1 Terms and definitions 8 3.2 Abbreviated terms . 10 4 General requirements 10 5 Performance criteria 10 5.1 General performance criteria. 10 5.2 Performance criterion A 10 5.3 Performance criterion B 11 5.4 Performance criteri
24、on C 11 6 Standard test conditions 11 6.1 General . 11 6.2 Immunity . 12 6.2.1 Electrostatic discharge (ESD) 12 6.2.2 RF fields 12 6.2.3 Fast transients (bursts) 13 6.2.4 Surge 13 6.2.5 RF voltage . 13 6.2.6 Power frequency magnetic fields . 13 6.2.7 Voltage dips and interruptions . 13 6.3 Emission
25、. 13 6.3.1 General . 13 6.3.2 Conducted emission 14 6.3.3 Radiated emission . 14 6.3.4 Low frequency emission 14 Annex A (informative) Additional information for fast transients (burst) test set-up . 15 Annex B (informative) Test set-ups 16 B.1 General . 16 B.2 Test set-up for conducted immunity tes
26、ts 16 B.3 Test set-up for ESD 17 B.4 Test set-up for conducted emission tests 17 B.5 Test set-up for radiated (immunity and emission) tests 17 Annex C (informative) . 19 Bibliography 20 Figure 1 EUT ports. 9 Figure B.1 Test set-up for conducted immunity tests 17 Figure B.2 Set-up for radiated tests
27、. 18 IEC 63044-5-1:2017 IEC 2017 3 Table C.1 Examples of product standards with an EMC part 19 Table C.2 Examples of stand alone EMC product standards 19 4 IEC 63044-5-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND
28、CONTROL SYSTEMS (BACS) Part 5-1: EMC requirements, conditions and test set-up FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
29、 international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (he
30、reafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also p
31、articipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible
32、, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While
33、all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to
34、apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation
35、of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this
36、publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indir
37、ect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the
38、 correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63044-5-1 has been pre
39、pared by IEC technical committee 23: Electrical accessories. The text of this standard is based on the following documents: CDV Report on voting 23/736/CDV 23/748/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T
40、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 63044-5-1:2017 IEC 2017 5 A list of all parts in the IEC 63044 series, published under the general title Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS), can be foun
41、d on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdraw
42、n, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.
43、6 IEC 63044-5-1:2017 IEC 2017 INTRODUCTION The IEC 63044 series deals with developing and testing Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). The IEC 63044-5 series ensures a common level of EMC requirements for HBES/BACS devices. IEC 63044-5-1:201
44、7 IEC 2017 7 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 5-1: EMC requirements, conditions and test set-up 1 Scope This part of IEC 63044 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in a
45、ddition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS networ
46、k. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to operator stations and other humans
47、ystem interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. 2 Normative references The following documents
48、are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61000-3-2, Electr
49、omagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) IEC 61000-3-3, Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection IEC 610
