1、 IEC TS 62257-6 Edition 2.0 2015-12 TECHNICAL SPECIFICATION Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement IEC TS 62257-6:2015-12(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Swit
2、zerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the count
3、ry of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varem
4、b Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publ
5、ications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibl
6、iographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (r
7、eference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also on
8、ce a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical
9、 Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77,
10、 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 62257-6 Edition 2.0 2015-12 TECHNICAL SPECIFICATION Recommendations for renewable energy
11、 and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 27.160 ISBN 978-2-8322-3069-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publica
12、tion from an authorized distributor. 2 IEC TS 62257-6:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative reference 6 3 Terms and definitions 7 4 General aspects 7 4.1 Introduction to AOMR actions . 7 4.2 Conditions impacting AOMR actions and guidelines 10 4.2.1 Characteristic
13、s of the project/systems to be managed . 10 4.2.2 Organization of AOMR personnel and responsibilities 10 4.2.3 Needed technical capabilities of AOMR participants 11 4.3 Training 12 5 Rules for systems 12 5.1 System identification and operational data record keeping 12 5.2 Organizational issues 13 5.
14、2.1 System limit definition of the AOMR domain 13 5.2.2 Planning of AOMR actions . 13 5.2.3 Traceability of AOMR actions . 14 5.3 Technical issues . 14 5.4 Acceptance issues 15 5.5 Recommended practices for intervention 15 5.6 Maintenance actions . 15 5.7 Replacement factors . 16 5.8 Analysis of the
15、 conformity of the delivered service to the contractual commitments 16 6 Rules for electric equipment 17 6.1 General aspects 17 6.2 Specific aspects related to electric equipment . 17 6.2.1 General . 17 6.2.2 Acceptance test . 18 6.2.3 Recommended practices for intervention . 18 6.2.4 Maintenance ac
16、tions 18 6.2.5 Replacement factors 18 Bibliography 20 Table 1 AOMR actions . 8 Table 2 System acceptance process description 9 Table 3 AOMR participant involvement 10 Table 4 Levels of skill for safety . 12 Table 5 Levels of general skill 12 Table 6 Maintenance actions planning -example 14 Table 7 V
17、oltage domains . 14 Table 8 Verification of the adherence to commitments . 17 IEC TS 62257-6:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION Part 6: Acceptance, operation, maintenance and replacement FOREWO
18、RD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the elect
19、rical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to tech
20、nical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Orga
21、nization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technica
22、l committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicat
23、ions is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nationa
24、l and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment servic
25、es and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servan
26、ts or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication
27、, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility t
28、hat some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee
29、may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate p
30、ossibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 62257-6, which is a technical specification, has been prepared by IEC technical commit
31、tee 82: Solar photovoltaic energy systems. 4 IEC TS 62257-6:2015 IEC 2015 This second edition cancels and replaces the first edition issued in 2005. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: redefine t
32、he maximum AC voltage from 500 V to 1 000 V as well as the maximum DC voltage from 750 V to 1 500 V; and removal of the limitation of the 100 kVA system size. Hence the removal of the word “small” with regard to the title and related references in this document. This technical specification is to be
33、 used in conjunction with the IEC 62257 series. The text of this technical specification is based on the following documents: Enquiry draft Report on voting 82/951/DTS 82/1002A/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting in
34、dicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62257 series, published under the general title Recommendations for renewable energy and hybrid systems for rural electrification, can be found on the IEC w
35、ebsite. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicat
36、ed on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be iss
37、ued at a later date. IEC TS 62257-6:2015 IEC 2015 5 INTRODUCTION The IEC 62257 series intends to provide to different players involved in rural electrification projects (such as project implementers, project contractors, project supervisors, installers, etc.) documents for the setting up of renewabl
38、e energy and hybrid systems with AC voltage below 1 000 V and DC voltage below 1 500 V. These documents are recommendations: to choose the right system for the right place; to design the system; to operate and maintain the system. These documents are focused only on rural electrification concentrati
39、ng on, but not specific to, developing countries. They should not be considered as all inclusive to rural electrification. The documents try to promote the use of renewable energies in rural electrification; they do not deal with clean mechanisms developments at this time (CO 2emission, carbon credi
40、t, etc.). Further developments in this field could be introduced in future steps. This consistent set of documents is best considered as a whole with different parts corresponding to items for safety as well as sustainability of systems aiming at the lowest life cycle cost as possible. One of the ma
41、in objectives is to provide the minimum sufficient requirements, relevant to the field of application, that is: renewable energy and hybrid off-grid systems. The purpose of this technical specification is to propose a methodology to achieve the best technical and economic conditions for acceptance,
42、operation, maintenance and replacement of equipment and complete system life cycle. 6 IEC TS 62257-6:2015 IEC 2015 RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION Part 6: Acceptance, operation, maintenance and replacement 1 Scope This part of IEC 62257, which is a t
43、echnical specification, intends to describe the various rules to be applied for acceptance, operation, maintenance and replacement (AOMR) of decentralized rural electrification systems (DRES) which are designed to supply electric power for sites which are not connected to a large interconnected syst
44、em, or a national grid, in order to meet basic needs. The majority of these sites are: isolated dwellings; village houses; community services (public lighting, pumping, health centers, places of worship or cultural activities, administrative buildings, etc.); economic activities (workshops, micro-in
45、dustry, etc.). This technical specification proposes a methodology to achieve the best technical and economic conditions for acceptance, operation, maintenance and replacement of equipment and complete system life cycle. It does not substitute for technical manuals provided by manufacturers for each
46、 equipment. The complexity of the system and application will dictate the level of required AOMR documentation. 2 Normative reference The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the ed
47、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62257 (all parts), Recommendations for renewable energy and hybrid systems for rural electrification IEC TS 62257-1, Recommendations for renewable energy and hybrid syst
48、ems for rural electrification Part 1: General introduction to IEC 62257 series and rural electrification IEC TS 62257-2, Recommendations for renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems IEC TS 62257-3, Recommendations f
49、or renewable energy and hybrid systems for rural electrification Part 3: Project development and management IEC TS 62257-4, Recommendations for renewable energy and hybrid systems for rural electrification Part 4: System selection and design IEC TS 62257-6:2015 IEC 2015 7 IEC TS 62257-7, Recommendations for renewable energy and hybrid systems for rural electrification Part 7: Generators IEC TS 62257-8, Recommendations for renewable energy and hybrid systems for rural
