CNS 1021-1981 Picks One Taper End and One Steel Craw End《十字镐（一端为尖锥状，一端为钢撬状）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

IEC 61290-10-1-2009 Optical amplifiers - Test methods - Part 10-1 Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer《光.pdf

IEC 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4 Multichannel parameters - Interpolated source subtraction method using an optical spectrum ana.pdf

IEC 61290-5-3-2002 Optical fibre amplifiers - Basic specifications - Part 5-3 Test methods for reflectance parameters Reflectance tolerance test method using el.pdf

IEC 61298-3-2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3 Tests for the effects of influence.pdf

IEC 61300-2-1-2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1 Tests - Vibration (sinusoidal)《.pdf

IEC 61300-2-11-2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11 Tests - Axial compression《纤维光.pdf

IEC 61300-2-14-2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14 Tests - High optical power《纤维.pdf

IEC 61300-2-15-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15 Tests - Torque strength of co.pdf

IEC 61300-2-18-2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18 Tests - Dry heat - High tempe.pdf