CNS 1030-1982 Method of Test for Flash Light《手电筒检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE MA 3445-1988 PACKING PREFORMED O-RING SEAL FLUOROCARBON (MIL-R-83485 TYPE I) METRIC《碳氟化合物(MIL-R-83485、I型）米制、预制O型密封圈的包装》.pdf

SAE MA 3446A-1994 BOLT MACHINE - TEE HEAD CHAMFERED CLASSIFICATION 1210 MPA 730 CLOSE TOL SHANK UNS N07001 METRIC《公制FSC 5306 UNS N07001高精度杆1210 MPA 730℃倒角类丁字头机器螺栓》.pdf

SAE MA 3447-1990 Bolt Machine - Spline Drive HD Close Tol Full Shank AMS-5662 Metric《公制FSC 5306 AMS-5662高精度全杆花键传动HD机器螺栓》.pdf

SAE MA 3448-1991 Bolt Spline Drive Special Extended Washer Head Reduced Head PD Shank AMS 5708 Metric《公制FSC 5306 AMS 5708 PD杆花键传动专用扩展垫圈缩径头螺栓》.pdf

SAE MA 3449-1991 Bolt Spline Drive Extended Washer Head Reduced Head Retainer Locked PD Shank AMS 5708 Metric《公制FSC 5306 AMS 5708 PD杆固定器锁定式花键传动专用扩展垫圈缩径头螺栓》.pdf

SAE MA 3450-1991 RETAINER NUT AND BOLT CUP LOCK 5 MM AND 6 MM AMS 5510 METRIC《公制 FSC 5340 AMS 5510杯锁5 mm和6 mm螺母和螺栓止动器》.pdf

SAE MA 3453-1990 WASHER FLAT AMS-5525 METRIC《公制FSC 5310 AMS-5525平垫圈》.pdf

SAE MA 3454A-2012 COVER - ENGINE ACCESSORY DRIVE SQUARE 127 28 BC METRIC AMS4424 (UNS M11630) OR AMS4484《封盖 发动机附件传动装置 正方形 127 28 BC 公制AMS4424 (UNS M11630)或AMS4484》.pdf

SAE MA 3471-1991 GASKET - ENGINE ACCESSORY DRIVE SQUARE 127 28 BC METRIC《公制FSC 2995 127 28 BC发动机附件传动装置方形衬垫》.pdf