CNS 1370-1987 Testing Standard of Electrical Copper Wires《铜电线检验标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2089-2000(2014) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications《用于空间应用的地面实验室原子氧气交互评估的标准实施规程》.pdf

ASTM E2089-2015 Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications《用于空间应用的地面实验室原子氧气交互评估的标准实施规程》.pdf

ASTM E2090-2006 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy《利用光电子显微镜.pdf

ASTM E2090-2012 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy《利用光电子显微镜.pdf

ASTM E2091-2005 Standard Guide for Use of Activity and Use Limitations Including Institutional and Engineering Controls《包含体制控制和工程控制的活动性及使用限值的使用标准指南》.pdf

ASTM E2091-2011 Standard Guide for Use of Activity and Use Limitations Including Institutional and Engineering Controls《包含制度和工程控制的活动利用和使用限制标准指南》.pdf

ASTM E2091-2017 Standard Guide for Use of Activity and Use Limitations Including Institutional and Engineering Controls《活动使用和使用限制标准指南 包括机构和工程控制》.pdf

ASTM E2092-2004 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis《热机分析三点弯曲处变形温度的标准试验方法》.pdf

ASTM E2092-2013 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis《采用热机械分析对三点弯曲上变形温度的的标准试验》.pdf