CNS 1983-1978 Sodium Salicylate《化学试药（柳酸钠）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SNI 05-3221-1992 Metric threaded crown nuts and slotted nuts thread diameter 42 to 100 mm《公制螺帽与槽型螺母 螺丝尺寸为42-100 mm》.pdf

SNI 05-3222-1992 Hexagon bolts and nuts metric series Space tolerances between two sides and two angles《六角螺栓与螺帽米制系列 两角到两边的空间公差》.pdf

SNI 05-3258-1994 Steel ribbon meter《钢卷尺》.pdf

SNI 05-3261-1994 Commercial refrigerators Test method《商用制冷机 测试方法》.pdf

SNI 05-3262-1994 Reach in commercial refrigerators General requirement《商用制冷机 一般要求》.pdf

SNI 05-3281-1994 Sealing devices - O ring - Part 1 Inside diameter cross section tolerances size identification code《密封装置 O型环 第1部分 内径、叉口、公差、型号辨别代码》.pdf

SNI 05-3282-1994 Sealing devices - O ring - Part 3 Quality acceptance criteria《密封装置 O型环 第3部分 通用质量标准》.pdf

SNI 05-3283-1994 Four - port modular stack valves and four port directional control valves size 03 and 05 - Clamping dimensions《四端口模块化叠加阀和四端口方向控制阀 大小03和05 夹紧尺寸》.pdf

SNI 05-3291-1994 Mobile cranes - Determination of stability《移动起重机 稳定性测试方法》.pdf