CNS 234-1953 Counter-boring Drill《颈圈沉钻头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 11386-1975 Blacksmith-s hand and hammer tools Crosscutting round nose calliper type pliers Design and dimensions《铁匠的手工工具和铁锤 横切圆嘴卡钳 设计和尺寸规格》.pdf

GOST 11387-1975 Blacksmith-s hand and hammer tools Crosscutting semi-round nose pliers Design and dimensions《铁匠的手工工具和铁锤 横切半圆嘴钳 设计和尺寸规格》.pdf

GOST 11388-1975 Blacksmith-s hand and hammer tools Crosscutting square nose pliers Desing and dimensions《手锻和锤锻用锻工工具 方口横钳 结构及尺寸》.pdf

GOST 11389-1975 Blacksmith-s hand and hammer tools Double-beak anvils Design and dimensions《铁匠的手工工具和铁锤 双嘴铁砧 设计和尺寸规格》.pdf

GOST 1139-1980 Basic norms of interchangeability Straight-sided splined joints Dimensions and tolerances《互换性的基本规范 直边花键接合 尺寸规格和公差》.pdf

GOST 11390-1975 Blacksmith-s hand and hammers tools Longitudinal cutting round nose pliers Design and dimensions《手锻和锤锻用锻工工具 圆口纵钳 结构及尺寸》.pdf

GOST 11391-1975 Blacksmith-s hand and hammer tools Longitudinal cutting square nose pliers Design and dimensions《铁匠的手工工具和铁锤 纵切方嘴钳 设计和尺寸规格》.pdf

GOST 11392-1975 Blacksmith-s hand and hammer tools Longitudial-cutting rectangular nose pliers Desing and dimensions《铁匠的手工工具和铁锤 纵切矩形嘴钳 设计和尺寸规格》.pdf

GOST 11393-1975 Blacksmith-s hand and hammer tools Auxiliary pliers for cylindrical bars Design and dimensions《手锻和锤锻用锻工工具 圆柱形毛坯用辅钳 结构及尺寸》.pdf