CNS 502-1978 ISO Metric Fine Screw Threads (Diameters from 12 to 80mm and Pitch 1 5mm)《公制细螺纹5（ISO制）（标称直径12至80公厘，螺距1 5公厘）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 6048B-2018 FITTING ELBOW 90 DEGREE STANDARD AND REDUCER BULKHEAD FLARELESS PRECISION TYPE.pdf

SAE AS 6049-2009 FITTING TEE STANDARD AND REDUCER BULKHEAD ON SIDE FLARELESS PRECISION TYPE《精密型标准及减径非扩口T形侧面隔板配件》.pdf

SAE AS 60491-2015 Sleeve Protection For Cable and Harness Protection.pdf

SAE AS 6049A-2018 FITTING TEE STANDARD AND REDUCER BULKHEAD ON SIDE FLARELESS PRECISION TYPE.pdf

SAE AS 604E-2012 Hose Assembly Polytetrafluoroethylene Metallic Reinforced 3000 psi 400 Heavyweight Hydraulic《液压重量级400℉ 3000 psi 金属加固 聚四氟乙烯软管接头》.pdf

SAE AS 6050-2009 FITTING ELBOW 45 DEGREES STANDARD AND REDUCER BULKHEAD FLARELESS PRECISION TYPE《精密型直口隔板弯头45配件减径管和标准》.pdf

SAE AS 6053A-2012 Tests Impact Shock Absorber Landing Gear Aircraft《航空器减震器起落架的冲击试验》.pdf

SAE AS 6054-2001 Drum Metal - Shipping and Storage《金属桶 船运和存储》.pdf

SAE AS 6055-2001 Drum Metal Reusable Shipping and Storage (Cap from 88 to 510 Cubic Inches)《FSC8110可重复使用金属辊筒 运输和存储工具(第88至510立方英寸)》.pdf