CNS 692-1991 Edison Screw Lamp Holders《螺旋灯座》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

C0049100_459 Method of test for materials finer than 75μm sieve in mineral aggregates by washing《粒料内小于试验筛７５μｍＣＮＳ３８６材料含量试验法（水洗法）》.pdf

C0049200_781 Whitworth Thread (Without Tip Clearance)《韦氏螺纹（尖端无空隙）》.pdf

C0049300_346 Fine Whitworth Thread (Diameter Ranging From 20 to 189 mm with Tip Clearance)《韦氏细螺纹（尖端有空隙，直径自２０至１８９公厘）》.pdf

C0049400_317 Parallel Pipe Threads《平行管螺纹》.pdf

C0049500_488 Taper Pipe Threads《推拔管螺纹》.pdf

C0049600_516 ISO Metric Screw Threads-Basic Profile (General Purpose)《公制螺纹基准轮廓（ＩＳＯ制）》.pdf

C0049700_459 ISO Metric Coarse Screw Threads《公制粗螺纹（ＩＳＯ制）》.pdf

C0049800_516 ISO Metric Fine Screw Threads (General)《公制细螺纹１（ＩＳＯ制）（总则）》.pdf

C0049900_781 ISO Metric Fine Screw Threads (Diameters From 1 to 3.5mm and Pitches 0.2 to 0.35mm)《公制细螺纹２（ＩＳＯ制）（标称直径１至３．５公厘，螺距０．２至０．３５公厘）》.pdf