CNS 714-1993 Cast Iron Flanged Gate Valves ( 5kgf c㎡) ( Outside Screw Type)《铸铁凸缘型闸阀（5KGF／C ㎡）（阀杆上升型）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18867-1984 Coniferons sawn timber Drying conditions in continions chambers《针叶树锯材 在逆流室连续作用下不干燥规则 典型工艺过程》.pdf

GOST 18868-1973 HSS tipped bent bullnose turning tools Design and dimensions《镶高速钢刀片的弯头外圆车刀 结构及尺寸》.pdf

GOST 18869-1973 HSS straight bullnose turning tools Design and dimensions《高速钢直通外圆车刀 结构及尺寸》.pdf

GOST 18870-1973 HSS side bullnose turning tools Design and dimensions《高速钢外圆限位车刀 结构及尺寸》.pdf

GOST 18871-1973 HSS tipped face side turning tools Design and dimensions《镶高速钢刀片端面车刀 结构及尺寸》.pdf

GOST 18872-1973 HSS boring and turning tools for through holes Design and dimensions《加工通孔用高速钢镗刀 结构及尺寸》.pdf

GOST 18873-1973 HSS boring and turning tools for blind holes Design and dimensions《加工不通孔用高速镗刀 结构及尺寸》.pdf

GOST 18874-1973 HSS grooving and cutting-off turning tools Design and dimensions《高速钢切槽和切断切刀 结构及尺寸》.pdf

GOST 18875-1973 HSS chamfering turning tools Design and dimensions《高速钢成形车刀 结构及尺寸》.pdf