CNS 76-1982 Knurling Wheels《辊纹轮》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

UNI 6975-1971 Measuring instruments Adjustable not go screw ring gauges for ISO metric threads with nominal diameter above 1 5 to 70 mm 《测量工具 直径超过1 5mm至70mm的ISO公制螺纹用可调节不过端螺纹环规》.pdf

UNI 6976-1971 Measuring instruments Go screw calliper gauges for ISO metric threads with nominal diameter above 1 5 to 100 mm《测量工具 直径超过1 5mm至100mm的ISO公制螺纹用凹口过端螺纹量规》.pdf

UNI 6977-1971 Measuring instruments Not go screw calliper gauges for ISO metric threads with nominal diameter above 1 5 to 100 mm 《测量工具 直径超过1 5mm至100mm的用ISO公制螺纹用凹口不过端螺纹量规》.pdf

UNI 6978-1971 Measuring instruments Go and not go screw calliper gauges for ISO metric threads with nominal diameter above 1 5 to 100 mm 《测量工具 标称直径超过1 5－100mm的ISO公制螺纹用凹口成型变速轴》.pdf

UNI 6979-1971 Measuring instruments Calliper gauges built-up type for nominal sizes up to 10 mm 《测量工具 标称尺寸10mm以内的光滑可组合凹口轴》.pdf

UNI 6980-1971 Measuring instruments Go and not go calliper gauges singol jaw for nominal sizes above 3 to 100 mm 《测量工具 标称尺寸超过3－100mm的光滑变速单凹口轴》.pdf

UNI 6981-1971 Measuring instruments Go and not go calliper gauges double jaw for nominal sizes above 3 to 100 mm 《测量工具 标称尺寸超过3－100mm的光滑极限双凹口轴》.pdf

UNI 6982-1971 Measuring instruments Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 1 5 to 50 mm 《测量工具 用于ISO公制螺纹的标称直.pdf

UNI 6983-1971 Measuring instruments Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 50 to 70 mm 《测量工具 用于过端螺纹环规和标称直径超.pdf