CSN ON 57 7826-1966 《猪排与蘑菇》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 1566-1985 Caps for rolling bearing blocks High end caps with cup seal for Diameters from 47 mm till 100 mm Basic dimensions《滚动轴承块压盖 47~100mm直径的杯形密封式高端盖 基本尺寸》.pdf

TCVN 1567-1985 Caps for rolling bearing blocks High end caps with cup seal for diameters from 110 mm till 400 mm Basic dimensions《滚动轴承块压盖 110~400mm直径的杯形密封式高端盖 基本尺寸》.pdf

TCVN 1568-1985 Caps for rolling bearing blocks Low end caps with grooves for fat diameters from 47 mm till 100 mm Basic dimensions《滚动轴承块压盖 47~100mm大直径的开槽式低端盖 基本尺寸》.pdf

TCVN 1569-1985 Caps for rolling bearing blocks Low end caps with grooves for fat diameters from 110 mm till 400 mm Basic dimensions《滚动轴承块压盖 110~400mm大直径的开槽式低端盖 基本尺寸》.pdf

TCVN 1570-1985 Caps for rolling bearing blocks Medium end caps with grooves for fat diameters from 47 mm till 100 mm Basic dimensions《滚动轴承块压盖 47~100mm大直径的开槽式中端盖 基本尺寸》.pdf

TCVN 1571-1985 Caps for rolling bearing blocks Medium end caps with fat grooves for fat diameters from 110 mm till 400 mm Basic dimensions《滚动轴承块压盖 110~400mm大直径的大开槽式中端盖 基本尺寸》.pdf

TCVN 1572-1985 Caps for rolling bearing blocks High end caps with grooves for fat diameters from 47 mm till 100 mm Basic dimensions《滚动轴承块压盖 47~100mm大直径的开槽式高端盖 基本尺寸》.pdf

TCVN 1573-1985 Caps for rolling bearing blocks High end caps with grooves for fat diameters from 110 mm till 400 mm Basic dimensions《滚动轴承块压盖 110~400mm大直径的开槽式高端盖 基本尺寸》.pdf

TCVN 1577-2007 Canned lychee《荔枝罐头》.pdf