CSN ON 71 4022-1966 《玻璃 碱性镁石灰 硅酸盐（BN19）材料清单》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 3180A-2014 BOLT MACHINE - DOUBLE HEX EXTENDED WASHER HEAD DRILLED CLOSE TOL SHANK AMS5643 (UNS S17400) 140 KSI 5625-18 UNJF-3A《机制螺栓 5625-18 UNJF-3A 140 KSI AMS5643 (UNS S174.pdf

SAE AS 31831-2011 COVER PROTECTIVE ELECTRIC CONNECTOR RECEPTACLE PUSH-PULL COUPLING《推挽式联结电插头连接器防护罩》.pdf

SAE AS 3208-1976 Packing Preformed - AMS 7276 - Seal《AMS 7276密封的预封装》.pdf

SAE AS 3209-1976 PACKING PREFORMED - AMS 7276 -O- RING《AMS 7276 O形环的预封装》.pdf

SAE AS 3215A-1979 RING RETAINING-SPIRAL INTERNAL HEAVY DUTY CRES《螺旋形固定的内部重载环 耐蚀钢 FSC 5365》.pdf

SAE AS 3216A-1979 RING RETAINING-SPIRAL EXTERNAL HEAVY DUTY CRES《螺旋、外部、重型、CRES档圈》.pdf

SAE AS 3217A-1979 RING RETAINING-SPIRAL INTERNAL LIGHT DUTY CRES《内部轻型CRES螺旋挡圈》.pdf

SAE AS 3218A-1979 RING RETAINING-SPIRAL EXTERNAL LIGHT DUTY CRES《外部轻型CRES螺旋挡圈》.pdf

SAE AS 3219A-1979 Ring Retaining Spiral Minimum Distortion Dimensional and Acceptance Standard For《螺旋挡圈的最小变形、尺寸和验收标准》.pdf