CSN ON 73 0542-1961 《绝缘设备的热量损失计算》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 4921N-2016 Titanium Bars Wire Forgings and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength (UNS R50700).pdf

SAE AMS 4922C-2010 Titanium Alloy Seamless Hydraulic Tubing 15V - 3 0Cr - 3 0Al - 3 0Sn Cold Worked and Precipitation Heat Treated (UNS R58153)《经冷处理和沉淀热处理的3 0Cr 3 0Al 3 0Sn 15 V钛合金.pdf

SAE AMS 4924H-2015 Titanium Alloy Bars Forgings and Rings-15 5Al - 2 5Sn Extra Low Interstitial Annealed (UNS R54521).pdf

SAE AMS 4926N-2015 Titanium Alloy Bars Wire and Rings 5Al - 2 5Sn Annealed 110 ksi (758 MPa) Yield Strength (UNS R54520).pdf

SAE AMS 4928W-2017 Titanium Alloy Bars Wire Forgings Rings and Drawn Shapes 6Al - 4V Annealed (UNS R56400).pdf

SAE AMS 4930H-2015 Titanium Alloy Bars Wire Forgings and Rings 6Al - 4V Extra Low Interstitial Annealed (UNS R56401).pdf

SAE AMS 4931E-2015 Titanium Alloy Bars Forgings and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed Fracture Toughness (UNS R56400).pdf

SAE AMS 4932C-2011 Titanium Alloy Sheet 6Al - 4V Driver Sheet (UNS R56400)《6Al 4V钛合金薄板驾驶员薄板材》.pdf

SAE AMS 4933F-2017 Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized (UNS R54810).pdf