CSN ON 73 6223-1966 《电压保护， 轨道线网上方的桥梁和小桥上的防止有害接触的电压保护》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 26393-1984 Polyethylene Method for determination of extractable substances content by diethyl ether《聚乙烯 乙醚提取物测定法》.pdf

GOST 26394-1984 Tools for cold upset automatic machines Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters Construction and dimensions《自动冷.pdf

GOST 26395-1984 Tools for cold upset automatic machines Hard alloy in sert cutters for cutting off bolt blanks with shank length above five diameters Construction and dimensions《自动.pdf

GOST 26396-1984 Tools for cold upset automatic machines Dies for cutting off bolt blanks Construction and dimensions《自动冷镦机的工具 螺栓毛坯切断用阴模 结构及尺寸》.pdf

GOST 26397-1984 Tools for cold upset automatic machines Bolt heading dies Construction and dimensions《自动冷镦机的工具 镦制螺栓用阴模 结构及尺寸》.pdf

GOST 26398-1984 Tools for cold upset automatic machines Bolt heading dies with shank reducing Construction and dimensions《自动冷镦机的工具 螺栓镦制带缩经用阴模 结构及尺寸》.pdf

GOST 26399-1984 Tools for cold upset automatic machines Coning punches Construction and dimensions《自动冷镦机的工具 预镦冲头 结构及尺寸》.pdf

GOST 26400-1984 Tools for cold upset automatic machines Coning punches with injectors Construction and dimensions《自动冷镦机的工具 带顶出器的预镦冲头 结构及尺寸》.pdf

GOST 26401-1984 Tools for cold upset automatic machines Finishing punches Construction and dimensions《自动冷镦机的工具 精镦精头 结构及尺寸》.pdf