1、 IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel- Cadmium Batteries for Stationary Applications Sponsored by the Stationary Batteries Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 1106-2015(Revision
2、ofIEEE Std 1106-2005) IEEE Std 1106-2015 (Revision of IEEE Std 1106-2005) IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications Sponsor Stationary Batteries Committee of the IEEE Power and Energy Society Appro
3、ved 26 October 2015 IEEE-SA Standards Board Abstract: Recommendations are provided for installation design and for installation, maintenance, and testing procedures that can be used to optimize the life and performance of vented nickel-cadmium batteries, including partially recombinant types, used i
4、n stationary applications. Keywords: battery tests, capacity test methods, IEEE 1106, stationary applications, vented nickel-cadmium batteries The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Ele
5、ctronics Engineers, Inc. All rights reserved. Published 16 November 2015. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In add
6、ition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test,
7、 measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from use
8、rs of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE
9、 Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR AN
10、Y DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
11、TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review
12、of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operation
13、s Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standard
14、s shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEE
15、E. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned i
16、nterests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in t
17、hose cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to
18、 the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any
19、applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not
20、 be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulatio
21、ns, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to paym
22、ent of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
23、Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents
24、should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together wi
25、th any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not whol
26、ly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata,
27、visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standar
28、ds can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter c
29、overed by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the s
30、tatement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and condit
31、ions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be require
32、d, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standar
33、d are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2015 IEEE. All rights reserved. vi Participants At th
34、e time this IEEE recommended practice was completed, the Ni-Cd Installation, Maintenance, and Testing Working Group had the following membership: James McDowall, Chair Dan Martin, Vice Chair Edward Amato Curtis Ashton William Cantor Peter Demar Ramesh Desai Tracey Hager Paul Anthonius Cornelis Hecto
35、rs Wayne Johnson Larry Meisner James Midolo Russell Miller Haissam Nasrat John Polenz Shawn Pryer Richard Tressler Lesley Varga The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. S. Aggarw
36、al Samuel Aguirre Ali Al Awazi Curtis Ashton Thomas Barnes Robert Beavers Christopher Belcher Thomas Blair William Bloethe William Cantor Paul Cardinal Garth Corey Charles Cotton Peter Demar Gary Donner Neal Dowling Donald Dunn Frank Gerleve Randall Groves Ajit Gwal Paul Anthonius Cornelis Hectors J
37、ames Kinney Jim Kulchisky Paneendra KumarBl Chung-Yiu Lam Thomas La Rose Daniel Levin Michael May John McAlhaney Jr. William McCoy James McDowall Larry Meisner James Midolo Haissam Nasrat Dennis Neitzel Michael Newman Joe Nims Gary Nissen Lorraine Padden Bansi Patel Christopher Petrola John Randolph
38、 Michael Roberts Charles Rogers Art Salander Bartien Sayogo Robert Schuerger Robert Seitz David Smith Richard Tressler Lesley Varga John Vergis Kenneth White Jian Yu Luis Zambrano When the IEEE-SA Standards Board approved this recommended practice on 26 October 2015, it had the following membership:
39、 John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen
40、Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Philip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2015 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 1106-2015, IEEE Recommended P
41、ractice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications. Today, stationary storage batteries play an ever-increasing role in industry by providing normal control and instrumentation power and backup energy for emergencies. This r
42、ecommended practice fulfills the need within the industry to provide common or standard practices of installation, maintenance, testing, and replacement of vented nickel-cadmium batteries, including partially recombinant types. The methods described are applicable to all installations and battery si
43、zes for stationary standby applications. The installations considered in the body of the document are designed for continuous-float operation with a battery charger serving to maintain the battery in a charged condition and to supply the normal dc load. Separate recommendations are provided in norma
44、tive Annex I for applications in which the battery is not fully recharged after every discharge (e.g., renewable energy systems). Copyright 2015 IEEE. All rights reserved. viii Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 2. Normative references 2 3. Definitions 2 4. Safety 3 4.1 General 3 4.2
45、 Methods . 3 4.3 Personal protective equipment and tools . 3 4.4 Precautions 4 5. Installation design criteria 5 5.1 General 5 5.2 Location . 5 5.3 Mounting . 6 5.4 Seismic 6 5.5 Ventilation . 6 5.6 Instrumentation and alarms 7 6. Installation procedures 7 6.1 General 7 6.2 Receiving and storage 7 6
46、3 Assembly . 8 6.4 Initial charge 9 7. Maintenance . 9 7.1 General 9 7.2 Inspections 10 7.3 Corrective actions .11 8. Test schedule .11 8.1 General .11 8.2 Acceptance .12 8.3 Performance 12 8.4 Service 13 8.5 Modified performance 13 9. Procedure for battery tests .13 9.1 General .13 9.2 Initial con
47、ditions .15 9.3 Test length and discharge rate 15 9.4 Capacity test methods .16 9.5 Capacity test procedures .18 9.6 Service test 18 9.7 Restoration 19 10. Replacement criteria 19 Copyright 2015 IEEE. All rights reserved. ix 11. Records 19 12. Reapplication and recycling 20 12.1 General .20 12.2 Rea
48、pplication 20 12.3 Recycling 20 Annex A (informative) Nickel-cadmium battery .21 A.1 Construction .21 A.2 Electrolyte 21 A.3 Charging voltage 21 A.4 Temperature .22 Annex B (informative) State of charge determination and charging .23 Annex C (informative) Corrective actions 24 C.1 Low-voltage cell 2
49、4 C.2 Water consumption 24 C.3 Low-voltage battery .24 Annex D (informative) Effect of prolonged float charging on battery capacity 25 Annex E (informative) Typical aging characteristics and end-of-life criteria of nickel-cadmium batteries 27 Annex F (informative) Comparison of capacity testing methods 28 F.1 General .28 F.2 Comparison of time- and rate-adjusted performance test methods.28 F.3 Capacity calculation examples .30 Annex G (informative) IEC 60623 test method.34 Annex H (informative) Internal ohmic measurements 35 Annex I (normative) Operation with renewable e
