1、 IEEE Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and Scalability Sponsored by the Corporate Advisory Group IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE-SA Board of Governors IEEE Std 1888.2-2014 IEEE Std 1888.2-2014 IEEE Standard for Ubiquitous
2、 Green Community Control Network: Heterogeneous Networks Convergence and Scalability Sponsor Corporate Advisory Group of the IEEE-SA Board of Governors Approved 27 March 2014 IEEE-SA Standards Board Abstract: This standard describes heterogeneous networks convergence and scalability, specifies the r
3、equirements of network convergence, extends the system architecture defined in IEEE Std 1888, IEEE Standard for Ubiquitous Green Community Control Network Protocol, with two new IEEE 1888 Components, i.e., the reconfigurable resolution server (RRS) and the intelligent application resolver (IAR), and
4、 generalizes primitive data type expressions and explicit field-bus data type management in IEEE 1888 systems. This standard enables IEEE 1888 systems to interoperate with heterogeneous access networks efficiently and improves the efficiency, flexibility, scalability and manageability of IEEE 1888 s
5、ystems. Keywords: field-bus data type, heterogeneous network convergence, IEEE 1888.2, intelligent application resolver, reconfigurable resolution server, scalability, primitive data type The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyrigh
6、t 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 30 May 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, curre
7、ncy, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that t
8、here are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state o
9、f the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity t
10、o another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
11、 IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WH
12、ETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus
13、development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance wi
14、th the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual
15、 presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regar
16、dless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standa
17、rds represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant respo
18、nse to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comm
19、ents on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards do
20、cument does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with appl
21、icable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both
22、use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to th
23、e documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, ple
24、ase contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards docu
25、ments Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the cur
26、rent edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, a
27、lthough still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuanc
28、e of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Err
29、ata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this stan
30、dard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an
31、Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable
32、 rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent C
33、laims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or n
34、on-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the tim
35、e this IEEE standard was completed, the IEEE 1888.2 Working Group had the following membership: Hongke Zhang, Chair Beijing Jiaotong University BII Group Holdings Ltd. China Telecommunications Corporation Cisco Systems Inc. Qingdao Gaoxiao Information Industry Co., Ltd. Raisecom Technology Co., Ltd
36、The University of Tokyo The P1888.2 Working Group gratefully acknowledges the contributions of the following participants. Without their assistance and dedication, this standard would not have been completed. Changhe Du Hiroshi Esaki Ming Feng Shuai Gao Chen Gu Xiaochuan Gu Hongyuan Jiang Lianshan J
37、iang Wenjie Li Zhigang Li Dong Liu Tsuyoshi Momose Hideya Ochiai Ming Qiu Shoichi Sakane Wei Su Hongchao Wang Hai Yang The following members of the entity balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Beijing Jiaotong University Beijin
38、g University of Posts and Telecommunications (BUPT) BII Group Holdings Ltd. China Datang Corporation China Telecommunications Corporation Cisco Systems, Inc. Guangzhou Smart Home Technology Standards Promotion Center Guangzhou Video-star Electronics Industrial Co., Ltd. Institute of Electrical Engin
39、eering Chinese Academy of Sciences Institute of Electronic and Information Engineering in Dongguan (UESTC) Institute of Software, Chinese Academy of Sciences (CAS) Marvell Semiconductor, Inc. Qingdao Gaoxiao Information Industry Co., Ltd. Raisecom Technology Co., Ltd. Renesas Electronics Corporation
40、 Southwest Jiaotong University State Grid Corporation of China (SGCC) The University of Tokyo Tsinghua University ZTE Corporation Copyright 2014 IEEE. All rights reserved. vi When the IEEE-SA Standards Board approved this standard on 27 March 2014, it had the following membership: John Kulick, Chair
41、 Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplin Stephen Dukes Jean-Philippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David J. Law Hung Ling Oleg Logvinov Ted Olsen Glenn Par
42、sons Ron Petersen Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Patrick Gibbons IEEE Standards Progr
43、am Manager, Document Development Krista Gluchoski IEEE Standards Project Specialist, Professional Services Joan Woolery IEEE Standards Program Manager, Technical Program Development Copyright 2014 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 1888.2-2014, IEEE
44、 Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and Scalability. IEEE 1888 has enabled access interoperability with many standard and proprietary protocols for field-bus systems including BACneta, LonWorksb, Modbus-based systems, ZigBeecdevices, etc. Howe
45、ver, IEEE 1888 lacks translation schemes among different application data types, generalized primitive data type expressions, and ID mapping configuration between field-bus and IEEE 1888 systems. That is, there are no efficient and scalable solutions for heterogeneous network convergence in IEEE 188
46、8 systems. This standard aims to provide the standard criteria for network convergence and scalability that enhances the heterogeneous networks interconnection and improves the efficiency, flexibility, scalability and manageability of IEEE 1888. This standard extends the system architecture defined
47、in IEEE Std 1888 d, IEEE Standard for Ubiquitous Green Community Control Network, with two new Components, i.e., the reconfigurable resolution server (RRS) and the intelligent application resolver (IAR). With the RRS, IEEE 1888 systems can support remote and dynamic distribution of ID mapping config
48、uration and translation rules. The IAR can perform automatic translation among different application data types. In addition, this standard generalizes primitive data type expressions, explicit field-bus data type management, and ID mapping configuration between field-buses and IEEE 1888 systems for
49、 heterogeneous networks convergence. This document is organized as follows: Clause 4 identifies the background and the requirements that this standard enables. Clause 5 defines the IEEE 1888 system architecture with the RRS and the IAR. Clause 6 generalizes the primitive data type expression. Clause 7 defines the management rule for importing field-bus data type. Clause 8 describes the security consideration. aBACnet is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). bLonWorks is a registered tra
