1、 IEEE Standard for Radio Interface for White Space Dynamic Spectrum Access Radio Systems Supporting Fixed and Mobile Operation Sponsored by the Dynamic Spectrum Access Networks Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Communications Society IEEE Std 1900.7-2015IEEE Std
2、 1900.7-2015 IEEE Standard for Radio Interface for White Space Dynamic Spectrum Access Radio Systems Supporting Fixed and Mobile Operation Sponsor Dynamic Spectrum Access Networks Standards Committee of the IEEE Communications Society Approved 5 December 2015 IEEE-SA Standards Board Abstract: A radi
3、o interface including medium access control sublayer and physical layer of white space dynamic spectrum access radio systems supporting fixed and mobile operation in white space frequency bands, while avoiding causing harmful interference to incumbent users in these frequency bands is specified in t
4、his standard. Keywords: IEEE 1900.7, medium access control sublayer, physical layer, radio interface, white space The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All
5、rights reserved. Published 15 February 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and
6、 all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, o
7、r provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publis
8、hing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should r
9、ely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTA
10、L, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
11、 OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only.
12、 In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be conside
13、red or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that hi
14、s or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not pro
15、vide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important tha
16、t any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter h
17、as previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secre
18、tary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require
19、ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Co
20、pyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-r
21、egulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, I
22、EEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewoo
23、d Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these do
24、cuments may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda
25、 or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state
26、of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at
27、http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEE
28、E-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By p
29、ublication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEE
30、E-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably fr
31、ee of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries i
32、nto the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
33、determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2016 IEEE. All rights reserved. vi Participants At the time this IEEE standard was
34、 completed, the 1900.7 Working Group had the following membership: Stanislav Filin, Chair Oliver Holland, Vice Chair Vinh-Dien Hoang, Technical Editor Muhammad Shakir, Secretary Muhammad Aljuaid Jean-Baptiste Dor Ignatius Lee Sajeev Manikkoth Baher Mawlawi Dominique Noguet R. Venkatesha Prasad The f
35、ollowing members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Iwan Adhicandra Thomas Alexander Tuncer Baykas Bernd Bochow William Carney Juan Carreon Yesenia Cevallos Suresh Channarasappa Keith Chow Todor Cooklev Ric
36、hard Edgar Charles Einolf Marc Emmelmann Stanislav Filin Avraham Freedman Yue Gao Alexander Gelman Tim Godfrey Randall Groves Michael Gundlach William Hayes Marco Hernandez Werner Hoelzl Oliver Holland Tetsushi Ikegami Noriyuki Ikeuchi Sergiu Iordanescu Atsushi Ito Raj Jain Adri Jovin Toru Kabe Piot
37、r Karocki Stuart Kerry Adrian Kliks Fumihide Kojima Bruce Kraemer Paul Lambert Roger Marks Jeffery Masters Edward McCall Nabil Nasser Michael Newman Alexandros Nikitas Paul Nikolich Dominique Noguet John Notor Satoshi Oyama Arumugam Paventhan Clinton Powell R. Venkatesha Prasad Maximilian Riegel Ben
38、jamin Rolfe M. K. Sajeev Naotaka Sato Bartien Sayogo Thomas Starai Walter Struppler Michael Swearingen Tuna Tugcu Mark-Rene Uchida Cornelis VanPuijenbroek Dmitri Varsanofiev John Vergis Gabriel Villardi Hung-Yu Wei Robert Weller Andreas Wolf Oren Yuen Copyright 2016 IEEE. All rights reserved. vii Wh
39、en the IEEE-SA Standards Board approved this standard on 5 December 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Gr
40、iffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phillip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2016 IEEE. Al
41、l rights reserved. viii Introduction This introduction is not part of IEEE Std 1900.7-2015, IEEE Standard for Radio Interface for White Space Dynamic Spectrum Access Radio Systems Supporting Fixed and Mobile Operation. This standard specifies a radio interface including medium access control sublaye
42、r and physical layer of white space dynamic spectrum access radio systems supporting fixed and mobile operation in white space frequency bands, while avoiding causing harmful interference to incumbent users in these frequency bands. This standard enables the development of cost-effective, multi-vend
43、or white space dynamic spectrum access radio systems capable of interoperable operation in white space frequency bands on a non-interfering basis to incumbent users in these frequency bands. Copyright 2016 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Definition
44、s, acronyms, and abbreviations 2 2.1 Definitions . 2 2.2 Acronyms and abbreviations . 2 3. Reference model . 3 4. MAC sublayer 4 4.1 Architecture of the MAC sublayer . 4 4.2 Type definition 4 4.3 MAC frame formats . 4 4.4 MAC sublayer service specification 9 4.5 MAC functional description 24 5. PHY
45、layer . 37 5.1 PHY layer service specification . 37 5.2 CRC method 42 5.3 Channel coding (including interleaving and modulation) 42 5.4 Mapping modulated symbols to carriers 47 5.5 Transmitter requirements . 53 Annex A (informative) Coexistence considerations . 55 Copyright 2016 IEEE. All rights res
46、erved. 1 IEEE Standard for Radio Interface for White Space Dynamic Spectrum Access Radio Systems Supporting Fixed and Mobile Operation IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or f
47、rom other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for
48、use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from
49、IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Overview 1.1 Scope This standard specifies a radio interface including medium access control (MAC) sublayer(s) and physical (PHY) layer(s) of white space dynamic spectrum access radio systems supporting fixed and mobile operation in white space frequency bands, while avoiding causing harmful interference to incumbent users in these frequency bands. 1.2 Purpose This standard enables the development of cost-effective, multi-vendor white space dynamic spectrum access radio systems capable of interoperable o
