1、Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems IEEE Std 3001.11 -2017 IEEE 3001 STANDARDS: POWER SYSTEMS DESIGNIEEE Std 3001.11-2017 IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Pow
2、er Systems Sponsor Technical Books Coordinating Committee of the IEEE Industry Applications Society Approved 23 March 2017 IEEE-SA Standards BoardAbstract: The selection and application of controllers and automation to industrial and commercial power systems is covered by this recommended practice.
3、It is likely to be of greatest value to the power-oriented engineer with limited experience with this equipment. It can also be an aid to all engineers responsible for the electrical design of industrial and commercial power systems. Keywords: automation, building automation system (BAS), contactor,
4、 controller, facility automation system (FAS), heater controller, IEEE 3001.11, industrial controller, motor control, motor control center (MCC), motor controller, motor starter, power controller, starter The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5
5、997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 12 September 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accurac
6、y, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standar
7、d does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through deve
8、lopments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any o
9、ther person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness
10、of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
11、 ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4
12、 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official stat
13、ements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of I
14、EEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revisi
15、on of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed cha
16、nge of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies
17、 and Standards Coordi- nating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revis
18、ions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applica
19、ble laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publ
20、ication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and ar
21、e adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by publ
22、ic authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard fo
23、r company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual sta
24、ndard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to ti
25、me through the issuance of amendments, corri- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When
26、a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE sta
27、ndard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about
28、 the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged
29、to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of an
30、y patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may i
31、ndicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent
32、Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms o
33、r conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such righ
34、ts, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the Power Systems Design Working Group had the following membership: Ga
35、ry H. Fox, Chair Duane Leschert, Vice Chair Sajjad Hussain Dan Neeser Dennis Nielsen Dev Paul Shervin Shokooh Jeremy Smith Peter Sutherland Steven Townsend Baskar Vairamohan Marcelo Valdes Joseph Weber The following members of the individual balloting committee voted on this recommended practice. Ba
36、lloters may have voted for approval, disapproval, or abstention. William Ackerman Robert Arno Frank Basciano Robert Beavers Sirak Belayneh Bill Brown Gustavo Brunello William Byrd Paul Cardinal Stephen Conrad Ratan Das Glenn Davis Davide De Luca Neal Dowling Donald Dunn Randall Groves Werner Hoelzl
37、Ronald Hotchkiss Alan Jensen Song Jin Laszlo Kadar Chad Kennedy Yuri Khersonsky Jim Kulchisky Marc Lacroix Jerry Murphy Daniel Neeser Dennis Neitzel Michael Newman Joe Nims Lorraine Padden Antony Parsons Iulian Profir James Reilly Michael Roberts Charles Rogers Bartien Sayogo Ted Schoenberg Robert S
38、eitz Nikunj Shah Michael Simon Jeremy Smith Jerry Smith Gary Smullin Wayne Stec Eugene Stoudenmire K. Stump David Tepen Wayne Timm Marcelo Valdes John Vergis John Wang Kenneth White Oren Yuen When the IEEE-SA Standards Board approved this recommended practice on 23 March 2017, it had the following m
39、embership: Jean-Philippe Faure, Chair Vacant Position, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Gary Hoffman Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla
40、 Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 3001.112017, IEEE Recommended Practice
41、 for Application of Controllers and Automation to Industrial and Commercial Power Systems. IEEE 3000 Standards Collection This recommended practice was developed by the Technical Books Coordinating Committee of the Industrial and Commercial Power Systems Department of the Industry Applications Socie
42、ty as part of a project to re- package the popular IEEE Color Books. The goal of this project is to speed up the revision process, eliminate duplicate material, and facilitate use of modern publishing and distribution technologies. When this project is completed, the technical material in the 13 IEE
43、E Color Books will be included in a series of new standardsthe most significant of which will be a new standard, IEEE Std 3000, IEEE Rec- ommended Practice for the Engineering of Industrial and Commercial Power Systems. The new standard will cover the fundamentals of planning, design, analysis, cons
44、truction, installation, startup, operation, and maintenance of electrical systems in industrial and commercial facilities. Approximately 60 additional dot standards, organized into the following categories, will provide in-depth treatment of many of the topics intro- duced by IEEE Std 3000: Power Sy
45、stems Design (3001 series) Power Systems Analysis (3002 series) Power Systems Grounding (3003 series) Protection and Coordination (3004 series) Emergency, Standby Power, and Energy Management Systems (3005 series) Power Systems Reliability (3006 series) Power Systems Maintenance, Operations, and Saf
46、ety (3007 series) In many cases, the material in a dot standard comes from a particular chapter of a particular IEEE Color Book. In other cases, material from several IEEE Color Books has been combined into a new dot standard. IEEE Std 3001.11 The material in this recommended practice largely comes
47、from subclauses 10.6 and 10.7 of the IEEE Red Book, IEEE Std 141-1993, IEEE Recommended Practice for Electric Power Distribution in Industrial Plants, and Chapters 6 and 14 of the IEEE Grey Book, IEEE Std 241-1990, IEEE Recommended Practice for Electric Power Systems in Commercial Buildings. This pu
48、blication provides a recommended practice for the electrical design of commercial and industrial fa- cilities. It is likely to be of greatest value to the power-oriented engineer with limited commercial or industrial plant experience. It can also be an aid to all engineers responsible for the electr
49、ical design of commercial and industrial facilities. However, it is not intended as a replacement for the many excellent engineering texts and handbooks commonly in use, nor is it detailed enough to be a design manual. It should be considered a guide and general reference on electrical design for commercial and industrial facilities. Tables, charts, and other information that have been extracted from codes, standards, and other technical liter- ature are included in this publication. Their inclusion is for illustrative purposes; where technical accura
