1、 IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations Corrigenda 1 Sponsored by the Energy Storage and Stationary Battery Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 535-2013/Cor 1-201
2、7 (Corrigenda to IEEE Std 535-2013) IEEE Std 535-2013/Cor. 1-2017 (Corrigenda of IEEE Std 535-2013) IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations Corrigenda 1 Sponsor Energy Storage and Stationary Battery Committee of the IEEE Po
3、wer and Energy Society Approved 6 December 2017 IEEE-SA Standards Board Abstract: This corrigenda clarifies the accelerated aging process for duty cycles greater than 8 h. Keywords: acceptance test, IEEE 450, IEEE 535, performance test, vented lead-acid battery The Institute of Electrical and Electr
4、onics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 19 January 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a par
5、ticular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standar
6、d is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
7、 issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity no
8、r is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a compe
9、tent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFIT
10、S; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGAR
11、DLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official s
12、tatements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position o
13、f IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for rev
14、ision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed ch
15、ange of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies
16、and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revision
17、s to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable
18、 laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publicati
19、on of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are a
20、dopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public au
21、thorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or indi
22、vidual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be ob
23、tained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda,
24、 or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not u
25、ndergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given docum
26、ent is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit
27、 the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is calle
28、d to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent
29、 applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under p
30、atent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE
31、is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if an
32、y, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from th
33、e IEEE Standards Association. Copyright 2018 IEEE. All rights reserved. vi Participants At the time this IEEE standard was completed, the 535 Working Group had the following membership: Robert Beavers, Chair Tania Martinez-Navedo, Vice Chair Robert Fletcher Wayne Johnson Dan Martin Jose Marerro Larr
34、y Meisner James Parello Jan Reber Surrendra Salgia The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Satish Aggarwal Curtis Ashton Gary Balash Robert Beavers Christopher Belcher William Bloethe Duane
35、 Brock Demetrio Bucaneg Jr Nissen Burstein William Cantor Paul Cardinal Thomas Carpenter Suresh Channarasappa Peter Demar Mamadou Diong Gary Donner Neal Dowling John Gagge Jr Randall Groves Ajit Gwal Hamidreza Heidarisafa Werner Hoelzl Wayne Johnson Thomas Koshy Jim Kulchisky Chung-Yiu Lam Jeffrey L
36、aMarca Daniel Martin Michael May James Mcdowall Larry Meisner Daleep Mohla Michael Newman Michael Nispel Michael OBrien Lorraine Padden James Parello Bansi Patel Anthony Picagli Jan Reber Christopher Searles Hamid Sharifnia David Smith Jeremy Smith Gary Stoedter Richard Tressler Kurt Uhlir James Van
37、 De Ligt Stephen Vechy John Vergis Kenneth White Hughes Wike When the IEEE-SA Standards Board approved this standard on 6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Mas
38、ayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Em
39、eritus Copyright 2018 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 535-2013/Cor. 1-2017, IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating StationsCorrigenda 1. This corrigendum to IEEE Std 535-2013 cl
40、arifies that the cells can be thermally aged for up to 5 years and then discharged tested for the tests identified in Annex A during the 5 year period. Adherence to this standard may not suffice for assuring public health and safety because it is the integrated performance of electrical systems of t
41、he station that limits the consequences of accidents. Each plant has the responsibility to provide assurance that this document, if used, is pertinent to their application and that integrated performance of their station is adequate. Copyright 2018 IEEE. All rights reserved. viii Contents 8. Type tests and analysis procedures . 1 8.3 Aging procedure . 1 Annex A (normative) Examples of testing regimens for 24-h and 72-h duty cycles for 10- and 20-year qualification 2
