1、 IEEE Standard for Low-Rate Wireless Personal Area Networks (WPANs) Amendment 1: Physical Layer Utilizing China Medical Bands Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.15.4n-2016(Amendment to IEEE Std 802.15.4-2015)
2、 IEEE Std 802.15.4n-2016(Amendment toIEEE Std 802.15.4-2015)IEEE Standard for Low-Rate Wireless Personal Area Networks (WPANs)Amendment 1: Physical Layer Utilizing China Medical BandsSponsorLAN/MAN Standards Committee of the IEEE Computer SocietyApproved 29 January 2016IEEE-SA Standards BoardThe Ins
3、titute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 29 April 2016. Printed in the United States of America.IEEE and IEEE 802 are registered trademark
4、s in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completenessof material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH
5、ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the
6、 time a standard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or otherservices for, or on behal
7、f of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reasonable care in any given circumstances or, asappropriate,
8、seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS O
9、F USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCEUPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUC
10、H DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process involves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version published by IEEE should be considered theapproved IEEE standa
11、rd.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to be the official position of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a formal
12、 position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should be considered the personal views of that individual rather than theformal position of IEEE. Comments on standardsComments
13、for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting information or advicepertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of apropose
14、d change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments and questions also receivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societie
15、s andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. For the same reason, IEEE does notrespond to interpretation requests. Any person who would like to participate in revisions
16、 to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws
17、 and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are responsible for observing or referring to the applicableregulatory requirements. IEEE does not, by the publication of it
18、s standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for
19、a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion of engineering practices and methods. By making these documents available for use andadoption by public authorities and
20、private users, IEEE does not waive any rights in copyright to thedocuments.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license tophotocopy portions of any individual standard for company or organizational internal use or individual, non-comme
21、rcial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual standard for educational classroom use can also be obtained throughthe C
22、opyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any timeby the issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official
23、 IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision proce
24、ss, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. Users are cautioned to check to determine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition a
25、nd whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/Xplore/home.jsp or contact IEEE at the address listed previously. For more informationabout the IEEE SA or IEEEs standards development process, visit the IE
26、EE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the po
27、ssibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant ha
28、sfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether the Submitter is willing or unwilling to grant licenses under patent rights wi
29、thout compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is notresponsible
30、for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms orconditions provided in connection with submission of a Letter of Assurance, if any, or in any licensin
31、gagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any patent rights, and the risk of infringement of such rights, is entirely theirown responsibility. Further information may be obtained from the IEEE Standards Associa
32、tion.6Copyright 2016 IEEE. All rights reserved.ParticipantsAt the time this amendment was sent to sponsor ballot, the IEEE P802.15 Working Group had the followingvoting members: Robert F. Heile, ChairRick Alfvin, Co-Vice ChairPatrick W. Kinney, Co-Vice ChairJames P. K. Gilb, Working Group Technical
33、EditorPatrick W. Kinney, SecretaryArthur Astrin,* Task Group n ChairLiang Li, Task Group 15.4n Vice ChairKenichi Mori, Task Group 15.4n SecretaryArthur Astrin,* Task Group 15.4n Lead Technical EditorShinsuke Hara, Task Group 15.4n Technical EditorKenichi Mori, Task Group 15.4n Technical EditorWei-xi
34、a Zhu, Task Group 15.4n Technical Editor*This standard is dedicated to the memory of Dr. Arthur “Art” Astrin, Task Group 802.15.4n Chairand good friend, who died 24 March 2016. His keen intellect, his ability to draw the best out ofpeople, and his ever-present sense of humor will be sorely missed. H
35、e leaves a legacy of impressiveaccomplishments in the field of wireless communications. May he rest in peace.Mounir AchirKeiji AkiyamaPhilip BeecherFrederik BeerChandrashekhar P. S. BhatKiran BynamEdgar CallawayChris CalvertRadhakrishna CanchiKapseok ChangSoo-Young ChangClint ChaplinStephen ChaskoPa
36、ul ChiltonSangsung ChoiHendricus de RuijterGuido DolmansIgor DotlicStefan DrudeDietmar EggertShahriar EmamiAndrew EstradaDavid EvansGeorge FlammerKiyoshi FukuiMatthew GillmoreTim GodfreyElad GottlibJussi HaapolaRainer HachTimothy HarringtonJames HartmanMarco HernandezKen HiragaIwao HosakoYeong Min J
37、angSeong-Soon JooAkifumi KasamatsuShuzo KatoToyoyuki KatoJeritt KentJaehwan KimYoungsoo KimShoichi KitazawaTero KivinenRyuji KohnoFumihide KojimaThomas KuernerByung-Jae KwakJae Seung LeeMyung LeeSangjae LeeHuan-Bang LiQing LiMichael LynchItaru MaekawaHiroyuki MatsumuraMichael McLaughlinMichael McInn
38、isRobert MoskowitzJinesh P. NairChiu NgoPaul NikolichJohn NotorHiroyo OgawaTaejoon ParkGlenn ParsonsCharles PerkinsAlbert PetrickClinton PowellVerotiana RabarijaonaIvan ReedeRichard RobertsBenjamin A. RolfeRuben E. Salazar CardozoNoriyuki SatoNorihiko SekineKunal ShahStephen ShellhammerShusaku Shima
39、daGary StuebingDon SturekMineo TakaiKou TogashiBilly VersoGabriel VillardiBrian WeisMakoto YaitaPeter YeeYu ZengChunhui (Allan) Zhu7Copyright 2016 IEEE. All rights reserved.Major contributions were received from the following individuals:The following members of the individual balloting committee vo
40、ted on this amendment. Balloters may havevoted for approval, disapproval, or abstention. When the IEEE-SA Standards Board approved this amendment on 29 January 2016, it had the followingmembership:Jean-Phillippe Faure, Chair Vacant, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Sec
41、retary*Member EmeritusArthur AstrinAndy BottomleyDietmar EggertShinsuke HaraMasahiro KurodaLiang LiKenichi MoriRick PowellLan ZhuWei-Xia ZhuRick AlfvinNobumitsu AmachiStefan AustGennaro BoggiaRiccardo BramaNancy BravinWilliam ByrdEdgar CallawayJuan CarreonSourav DuttaRichard EdgarDavid EvansGregory
42、GilloolyRandall GrovesRainer HachMarco HernandezWerner HoelzlNoriyuki IkeuchiAkio IsoAtsushi ItoOyvind JanbuSteven JillingsShinkyo KakuStuart KerryPatrick W. KinneyBruce KraemerYasushi KudohKhanh Tuan LeArthur H. LightWilliam LumpkinsElvis MaculubaApurva ModyMichael NewmanNick S. A. NikjooSatoshi Oy
43、amaSubburajan PonnuswamyClinton PowellVenkatesha PrasadRobert RobinsonBenjamin A. RolfeOsman SakrDaniel SmolinskiJu-Hyung SonThomas StaraiRene StruikWalter StrupplerMark-Rene UchidaPrabodh VarshneyGeorge VlantisKhurram WaheedHung-Yu WeiAndreas WolfOren YuenDaidi ZhongMingtuo ZhouChuck AdamsMasayuki
44、AriyoshiTed Burse Stephen Dukes Jianbin FanJ. Travis GriffithGary Hoffman Ronald W. HotchkissMichael Janezic Joseph L. Koepfinger* Hung Ling Kevin LuGary RobinsonAnnette D. ReillyMehmet UlemaYingli WenHoward WolfmanDon Wright Yu Yuan Daidi Zhong8Copyright 2016 IEEE. All rights reserved.IntroductionT
45、his amendment to IEEE Std 802.15.4-2015 defines an alternate physical layer (PHY) in addition to theestablished IEEE 802.15.4 PHYs. This alternate PHY is specified for the 174216 MHz, 407425 MHz,and 608630 MHz bands. The amendment also defines the medium access control (MAC) modificationsthat may be
46、 used to support this alternate PHYs implementation.The Ministry of Industry and Information Technology (MIIT) of the Peoples Republic of China hasapproved the 174216 MHz, 407425 MHz, and 608630 MHz bands for medical information transmission.This introduction is not part of IEEE Std 802.15.4n-2016,
47、IEEE Standard for Low-Rate Wireless Personal AreaNetworks (WPANs)Amendment 1: P hysical Layer Utilizing China Medical Bands.9Copyright 2016 IEEE. All rights reserved.Contents3. Definitions, acronyms, and abbreviation.123.2 Acronyms and abbreviations.125. General description125.2 Special application
48、spaces.125.2.7 China medical band (CMB).1210. General PHY requirements1210.1 General requirements and definitions1210.1.1 Operating frequency range.1210.1.2 Channel assignments1410.1.2.12 Channel numbering for CMB PHYs1410.1.2.12.1 Channel numbering for CMB O-QPSK PHY1410.1.2.12.2 Channel numbering
49、for CMB GFSK PHY1411. PHY services1511.3 PHY PIB attributes1530. CMB PHY1530.1 CMB O-QPSK PHY specification.1530.1.1 PPDU format for the CMB O-QPSK PHY1530.1.1.1 Preamble field1530.1.1.2 SFD field1530.1.1.3 PHR field.1630.1.1.4 PSDU field.1630.1.2 Modulation and coding for CMB O-QPSK PHY1630.1.2.1 Reference modulator diagram1630.1.2.2 SHR coding and spreading1630.1.2.3 PHR coding and spreading1730.1.2.4 PSDU coding and spreading for DSSS1730.1.2.5 DSSS bit-to-chip mapping.1730.1.2.6 Chip whitening.1730.1.2.7 Modulation parameters for CMB O-QPSK.1830.1.3 CMB O-QPS
