1、 IEEE Standard for Low-Rate Wireless Personal Area Networks (WPANs) Amendment 2: Ultra-Low Power Physical Layer Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.15.4q-2016(Amendment to IEEE Std 802.15.4-2015 as amended by
2、IEEE Std 802.15.4n-2016) IEEE Std 802.15.4q-2016(Amendment toIEEE Std 802.15.4-2015as amended by IEEE Std 802.15.4n-2016)IEEE Standard for Low-Rate Wireless Personal Area Networks (WPANs)Amendment 2: Ultra-Low Power Physical LayerSponsorLAN/MAN Standards Committee of the IEEE Computer SocietyApprove
3、d 29 January 2016IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 29 April 2016. Printed in the United States of Ame
4、rica.IEEE and IEEE 802 are registered trademarks in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completenessof material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.IEEE stan
5、dards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the IEEE standa
6、rd. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering
7、 professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reasonable care
8、 in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:PROC
9、UREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCEUPON ANY STAN
10、DARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process involves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version published by IE
11、EE should be considered theapproved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to be the official position of IEEE or any of itscommittees and shall not be c
12、onsidered to be, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should be considered the personal views of that individual rather than theformal p
13、osition of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting information or advicepertaining to IEEE Standards documents. Suggestions for changes
14、 in documents should be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments and questions also receivethe concurrence of a balance of interests. For th
15、is reason, IEEE and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. For the same reason, IEEE does notrespond to interpretation requests. Any pe
16、rson who would like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standar
17、ds documents should consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are responsible for observing or referring to the applicableregulatory requir
18、ements. IEEE does not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They
19、are made available by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion of engineering practices and methods. By making these documents available
20、 for use andadoption by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license tophotocopy portions of any individual standard for company or organ
21、izational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual standard for educational
22、classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any timeby the issuance of new editions or may be amended from time to time through the issuance o
23、f amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
24、yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. Users are cautioned to check to determine thatthey have the latest edition of any IEEE standard.In order to determine wh
25、ether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/Xplore/home.jsp or contact IEEE at the address listed previously. For more informationabout the IEEE SA or IE
26、EEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for erratape
27、riodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to theexistence or validity of any patent rights in connection there
28、with. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether the Submitter is willing or unw
29、illing to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has
30、 not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms orconditions provided in connection with submission of a
31、Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any patent rights, and the risk of infringement of such rights, is entirely theirown responsibility. Further information
32、may be obtained from the IEEE Standards Association.6Copyright 2016 IEEE. All rights reserved.ParticipantsAt the time this amendment was sent to sponsor ballot, the IEEE P802.15 Working Group had the followingvoting members: Robert F. Heile, ChairRick Alfvin, Co-Vice ChairPatrick W. Kinney, Co-Vice
33、ChairJames P. K. Gilb, Working Group Technical EditorPatrick W. Kinney, SecretaryChiu Ngo, Task Group 15.4q ChairKiran Bynam, Task Group 15.4q Vice ChairJinesh P. Nair, SecretaryChunhui (Allan) Zhu, Task Group 15.4q Lead Technical EditorHendricus de Ruijter, Task Group 15.4q RS-GFSK Technical Editor
34、Chandrashekhar Thejaswi, Task Group 15.4q TASK Technical EditorMajor contributions were received from the following individuals:Mounir AchirKeiji AkiyamaArthur AstrinPhilip BeecherFrederik BeerChandrashekhar P. S. BhatEdgar CallawayChris CalvertRadhakrishna CanchiKapseok ChangSoo-Young ChangClint Ch
35、aplinStephen ChaskoPaul ChiltonSangsung ChoiGuido DolmansIgor DotlicStefan DrudeDietmar EggertShahriar EmamiAndrew EstradaDavid EvansGeorge FlammerKiyoshi FukuiMatthew GillmoreTim GodfreyElad GottlibJussi HaapolaRainer HachShinsuke HaraTimothy HarringtonJames HartmanMarco HernandezKen HiragaIwao Hos
36、akoYeong Min JangSeong-Soon JooAkifumi KasamatsuShuzo KatoToyoyuki KatoJeritt KentJaehwan KimYoungsoo KimShoichi KitazawaTero KivinenRyuji KohnoFumihide KojimaThomas KuernerByung-Jae KwakJae Seung LeeMyung LeeSangjae LeeHuan-Bang LiLiang LiQing LiMichael LynchItaru MaekawaHiroyuki MatsumuraMichael M
37、cLaughlinMichael McInnisKenichi MoriRobert MoskowitzPaul NikolichJohn NotorHiroyo OgawaTaejoon ParkGlenn ParsonsCharles PerkinsAlbert PetrickClinton PowellVerotiana RabarijaonaIvan ReedeRichard RobertsBenjamin A. RolfeRuben E. Salazar CardozoNoriyuki SatoNorihiko SekineKunal ShahStephen ShellhammerS
38、husaku ShimadaGary StuebingDon SturekMineo TakaiKou TogashiBilly VersoGabriel VillardiBrian WeisMakoto YaitaPeter YeeYu ZengFrederick BeerKiran BynamHendricus de RuijterGuido DolmansShahriar EmamiYoung-Jun HongYoungsoo KimJinesh P. NairChiu NgoChangsoon ParkChandrashekhar ThejaswiChunhui (Allan) Zhu
39、7Copyright 2016 IEEE. All rights reserved.The following members of the individual balloting committee voted on this amendment. Balloters may havevoted for approval, disapproval, or abstention. When the IEEE-SA Standards Board approved this amendment on 29 January 2016, it had the followingmembership
40、Jean-Phillippe Faure, Chair Vacant, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary*Member EmeritusRick AlfvinNobumitsu AmachiTuncer BaykasPhilip E. BeecherChandrashekhar P. S. BhatGennaro BoggiaRiccardo BramaNancy BravinKiran BynamWilliam ByrdEdgar CallawayJuan CarreonCli
41、nt ChaplinKeith ChowCharles CookTodor CooklevHendricus de RuijterSourav DuttaPeter EcclesineRichard EdgarDavid EvansAvraham FreedmanJames P. K. GilbRandall GrovesRobert F. HeileMarco HernandezWerner HoelzlTetsushi IkegamiNoriyuki IkeuchiAkio IsoAtsushi ItoAdri JovinByoung-Hoon JungHakyung JungHyunje
42、ong KangPiotr KarockiJeritt KentStuart KerryYongbum KimYoungsoo KimFumihide KojimaBruce KraemerJeremy LandtMyung LeeLiang LiArthur H. LightElvis MaculubaJinesh P. NairMichael NewmanChiu NgoJohn NotorSatoshi OyamaJeongho ParkJungshin ParkSeung-Hoon ParkDalibor PokrajacClinton PowellVenkatesha PrasadC
43、hang-Woo PyoVerotiana RabarijaonaR. K. RannowMaximilian RiegelRobert RobinsonBenjamin A. RolfeM. K. SajeevBartien SayogoKunal ShahMichael SmiejaJu-Hyung SonThomas StaraiRene StruikWalter StrupplerMark-Rene UchidaLorenzo VangelistaCornelis Van PuijenbroekDmitri VarsanofievGeorge VlantisKhurram Waheed
44、Hung-Yu WeiAndreas WolfOren YuenChunhui ZhuChuck AdamsMasayuki AriyoshiTed Burse Stephen Dukes Jianbin FanJ. Travis GriffithGary Hoffman Ronald W. HotchkissMichael Janezic Joseph L. Koepfinger* Hung Ling Kevin LuGary RobinsonAnnette D. ReillyMehmet UlemaYingli WenHoward WolfmanDon Wright Yu Yuan Dai
45、di Zhong8Copyright 2016 IEEE. All rights reserved.IntroductionFor over a decade, the IEEE P802.15 Working Group successfully developed wireless personal area network(WPAN) standards (IEEE Std 802.15.4) with low energy consumption in mind. However, furtherreduction in energy consumption is desired to
46、 address emerging markets like wearable devices, electronicshelf labeling, and automation where the energy sources, driven by size and cost constraints, are limited tosmall batteries (e.g., coin cell batteries). These energy sources have substantially less capacity and peakpower ratings than traditi
47、onal batteries (e.g., size AA or AAA). This trend calls for an amendment that aimsfor further reduction in energy consumption and peak power. It is expected that this amendment could alsobenefit the traditional markets, which have already been successfully addressed by IEEE Std 802.15.4. This amendm
48、ent specifies two alternative physical layers (PHYs), TASK and RS-GFSK, in addition to thePHYs of IEEE Std 802.15.4-2015. The amendment also defines the medium access control (MAC)modifications needed to support the implementation of the TASK and RS-GFSK PHYs. Both PHYs arespecified for 2.4 GHz and
49、several sub-gigahertz bands using multiple data rates up to 1 Mb/s.The TASK PHY specifies a physical layer based on amplitude shift keying with ternary amplitude sequencespreading (TASK). This PHY allows implementation of transceivers with low complexity and enables lowpower consumption. As an important feature, this PHY also supports communications in both coherent andnoncoherent modes of reception and thereby allows tradeoff between receiver complexity and performance. The RS-GFSK PHY specifies a physical layer based on Gaussian frequency shift keying (GFSK). This PHYprov
