1、 IEEE Std 90003-2008 IEEE Std 90003-2008 IEEE Recommended Practice for Unique Identification in Hydroelectric Facilities Sponsored by the Energy Development and Power Generation Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 21 October 2011 IEEE Power +1 978 750 8400. Permission to photoco
2、py portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. iv Copyright 2011 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 807-2011, IEEE Recommended Practice for Unique Identification in Hydro
3、electric Facilities. In April 1979, the Unique Identification in Power Plants Working Group of the Station Design Subcommittee was formed and charged with the task of producing a series of recommended practices for unique identification in power plants. The scope of the project was later extended to
4、 include power plant “related facilities.” The resultant series of recommended practices, entitled the Energy Industry Identification System (EIIS), provided a single source for unique identification of systems, structures, and components for all types of power generation and related facilities with
5、 provision for the inclusion of currently established plant system identifier codes. Using this series of recommended practices, which included principles, a table of component-function identifier codes, implementation instructions, and system descriptions for the various types of power plants and r
6、elated facilities, a user would be able to correlate a system, structure, or component with another organization for purposes of reporting, comparison, or general communication. Numerous safety and convenience benefits have been derived from this concept. IEEE Std 803.1-1992 B6 provided a table of c
7、omponent function identifiers for general use in developing unique identification codes for nuclear and fossil-fueled power-plant projects.aThe original purpose of this working group was to generate an industry-wide language of communication that could be employed by users at the interface of their
8、organizations and that would not require users to change a viable identification concept that they were already using internally. In the event that the users do not have a viable identification concept of their own, they are encouraged to employ the concept described herein for their internal applic
9、ations because of its successful application by electrical utilities, architectural engineers, and consulting firms. In September 1984, a working group was formed to develop EIIS for hydroelectric plants. The project was subsequently withdrawn when it was recognized that hydroelectric facilities, in
10、cluding pumped-storage facilities, are comprised of many specialized systems and equipment types not in common with steam generating plants. Because of the unique structures and components found in hydro plants, consensus was reached within the Energy Development and Power Generation Committee that
11、development of a recommended practice for unique identification in hydroelectric facilities should be delegated to the Hydroelectric Power Subcommittee. In October 2002, the Unique Identification in Hydroelectric Facilities Working Group of the Hydroelectric Power Subcommittee was formed and charged
12、 with the task of developing a recommended practice for unique identification with emphasis on hydroelectric facilities. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply co
13、mpliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory aThe numbers in brackets correspond to those of the bibliography in Annex A. v Copyright 2011 IEEE. All rights reserved. requirements. IEEE does no
14、t, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These incl
15、ude both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copy
16、right to this document. Updating of IEEE documents Users of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at an
17、y point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit t
18、he IEEE Standards Association web site at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA web site at http:/standards.ieee.org. Er
19、rata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standar
20、ds.ieee.org/findstds/interps/index.html. Patents Attention is called to the possibility that implementation of this recommended practice may require use of subject matter covered by patent rights. By publication of this recommended practice, no position is taken with respect to the existence or vali
21、dity of any patent rights in connection therewith. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in
22、 connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this recommended practice are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirel
23、y their own responsibility. Further information may be obtained from the IEEE Standards Association. vi Copyright 2011 IEEE. All rights reserved. Participants At the time this recommended practice was submitted to the IEEE-SA Standards Board for approval, the Unique Identification in Hydroelectric F
24、acilities Working Group had the following membership: Randall C. Groves, Chair Jay A. Anders David B. Apps Terry Bauman Bruce A. Benson Steven R. Brockschink Matthew T. Davis Russ J. Fostiak George K. Girgis R. Dale Harris John Kelly David L. Kornegay Lucas A. Kunz Charles A. Lennon, Jr. Lawrence D.
25、 Long Cliff F. Malm Cory Maurer Edward P. Miska Alex Morrison Hans Naeff Zhang Runshi Douglas B. Seely Chris Shultz Philip A. Spotts William W. Terry Wayne Timm Eric Vaughn John B. Yale The following members of the individual balloting committee voted on this recommended practice. Balloters may have
26、 voted for approval, disapproval, or abstention. William J. Ackerman Steven R. Brockschink Matthew T. Davis Gary Donner Gary Engmann Russ J. Fostiak Randall C. Groves James Gurney Werner Hoelzl Piotr Karocki David L. Kornegay Jim Kulchisky Chung-Yiu Lam Charles A. Lennon, Jr. Lawrence D. Long Greg L
27、uri O. Malik Don McLaren Michael S. Newman Lorraine Padden Christopher Petrola Charles Rogers Bartien Sayogo Douglas B. Seely Gil Shultz James Smith Gary Stoedter Wayne Timm James Timperley John Vergis John B. Yale When the IEEE-SA Standards Board approved this recommended practice on 10 September 2
28、011, it had the following membership: Richard H. Hulett, Chair John Kulick, Vice Chair Robert M. Grow, Past Chair Judith Gorman, Secretary Masayuki Ariyoshi William Bartley Ted Burse Clint Chaplin Wael Diab Jean-Philippe Faure Alexander Gelman Paul Houz Jim Hughes Joseph L. Koepfinger* David J. Law
29、Thomas Lee Hung Ling Oleg Logvinov Ted Olsen Gary Robinson Jon Walter Rosdahl Sam Sciacca Mike Seavey Curtis Siller Phil Winston Howard L. Wolfman Don Wright *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Satish K. Aggarwal, NRC Representative Richard De
30、Blasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Laurie Policastro IEEE Standards Program Manager, Technical Program Development vii Copyright 2011 IEEE. All rights reserved. Contents 1. Overview 1 1.1 Scope . 1 1.2 Purp
31、ose 1 1.3 General 1 2. Normative references 3 3. Definitions 3 4. Structure description. 3 4.1 General 3 4.2 Alphanumeric unique identifier. 4 4.3 Structure hierarchy 4 4.4 Code generation. 4 5. Common system characteristics . 4 5.1 Attributes . 4 5.2 Scope and boundaries 6 5.3 Structure 6 5.4 Gener
32、ic examples 7 6. Available systems. 9 6.1 General 9 6.2 KKS system . 9 6.3 Energy Industry Identification System (EIIS) . 10 6.4 Alphabetic abbreviations . 11 6.5 Code of accounts . 11 6.6 System defined by engineering consultant 12 6.7 System defined by the equipment supplier 13 6.8 Outage Cause Co
33、des 13 6.9 Software-assigned database keys. 13 Annex A (informative) Bibliography . 15 Annex B (informative) Implementation examples . 16 Annex C (informative) System identification code examples 18 Annex D (informative) Component function identification code examples. 24 viii Copyright 2011 IEEE. A
34、ll rights reserved. IEEE Recommended Practice for Unique Identification in Hydroelectric Facilities IMPORTANT NOTICE: This standard is not intended to ensure safety, security, health, or environmental protection. Implementers of the standard are responsible for determining appropriate safety, securi
35、ty, environmental, and health practices or regulatory requirements. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice”
36、 or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Overview 1.1 Scope This recommended practice provides a unique identification system for hydro facilities that segregates a
37、nd incorporates plant, unit, system, and component identifiers as a minimum. 1.2 Purpose This recommended practice can be used as a unique identification system to delineate failure reporting, maintenance management, and design. The unique identification system is structured to allow expansion of th
38、e identifiers in a standard format to the level of detail that may be required. 1.3 General Identification systems are used throughout hydroelectric plant design, construction, and maintenance. Unique identification is useful for maintenance and operating procedures, safety and clearance tagging, ma
39、intenance planning, and inventory control. Many systems are in use, including standard and individual owner developed systems. 1 Copyright 2011 IEEE. All rights reserved. IEEE Std 807-2011 IEEE Recommended Practice for Unique Identification in Hydroelectric Facilities Unique identification systems t
40、ypically use an alphanumeric code to designate a specific equipment or system. The characters or numbers in the alphanumeric code are given specific meaning relating to the eventual unique description of a specific equipment or system. Systems using unique identifiers do exist for reporting the fail
41、ure and outages of hydroelectric equipment such as the North American Electric Reliability Corporations (NERC) Generating Availability Data System (GADS). This structure tends to be limited to high-level reporting and is not used in low-level reports such as inventory or maintenance. NERC does maint
42、ain a large database for recording generation failures, the type of failure, the equipment that failed, and the length of the outage. The database is generally used for comparison purposes and benchmarking performance. Hydroelectric generation is recognized as a unique type of generation in the data
43、base. It has become common practice for owners of generating facilities to utilize inventory, labor, and maintenance scheduling programs that employ unique identifiers. These identifiers can be used to track a variety of items that have meaning to the owner such as labor hours expended on a particul
44、ar task, the tools and inventory used, and specific equipment or system involved. Some suppliers of maintenance programs require proprietary identifiers be used within their program, and others allow facility owners to develop their own identification schemes. Often owners of facilities require that
45、 equipment and systems be uniquely identified on the drawings of record. The Instrument Society of America (ISA), now known as The International Society of Automation, developed one such system, originally known as S5.1, which was adopted by the American National Standards Institute (ANSI) and has b
46、een used for identification of process control instruments and devices. Another system for identification of electrical control, monitoring, and protective devices is presented in IEEE Std C37.2.1A system, common in Europe, for generating unique identifiers is the KKS system. KKS is the widely used
47、abbreviation for Kraftwerk-Kennzeichensystem that translates to “identification system for power plants” and will be discussed later in this recommended practice (see 6.2). North America does not have a common practice though the Energy Industry Identification System (EIIS), as described in IEEE Std
48、 803-1983 B5, IEEE Std 803.1-1992 B6, and IEEE Std 804-1983 B7, with user-customized variations frequently used. An example will be developed later in this recommended practice.2A goal of a commonly used unique identifier system is to be able to benchmark one plant, equipment, or system against simi
49、lar equipment. Attempts have been made to achieve this goal though none have been universally accepted. In addition to alphanumeric naming, power plant systems employ other means of identification coding. For example, visual codes provide color, shape, or positional clues to the operator. Acoustic and tactile codes are provided to focus attention to particular control events. These additional coding principles are discussed in detail within IEC 60073 B1. Coding methods not involving some combination of alphabetic and numeric identification codes are not cove
