1、IEEE Guide for AC High-Voltage Circuit Breakers 1000 Vac Rated on a Symmetrical Current BasisIEEE Std C37.010-2016 (Revision of IEEE Std C37.010-1999)IEEE Power and Energy SocietySponsored by the Switchgear CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std C37.010-2016 (Revision of IEEE S
2、td C37.010-1999)IEEE Guide for AC High-Voltage Circuit Breakers 1000 Vac Rated on a Symmetrical Current BasisSponsor Switchgear Committee of the IEEE Power and Energy SocietyApproved 22 September 2016IEEE-SA Standards BoardAbstract: The application of indoor and outdoor high-voltage circuit breakers
3、 rated above 1000 Vac for use in commercial, industrial, and utility installations is covered in this guide. It deals with usage under varied service conditions, temperature conditions affecting continuous current compensa-tion, reduced dielectrics, reclosing derating as applicable, calculation of s
4、ystem short-circuit cur-rent, compensation at different X/R ratios, detailed calculations with application curves, out-of-phase switching, and general application.Keywords: ambient compensation/emergency operation, capacitor switching, high-voltage circuit breakers, IEEE C37.010, indoor drawout, out
5、door, pollution level creepage distance, power frequency, line closing, load current switching, rated maximum voltage, short-circuit consideration, transformer current switching, TRVThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2017 b
6、y The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 17 April 2017. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or
7、 completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are
8、 no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the ar
9、t and comments received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another
10、. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EV
11、ENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
12、 CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.TranslationsThe IEEE consensus developme
13、nt process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4Copyright 2017 IEEE. All rights reserved.Official statementsA statement, written or oral, that is
14、 not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or edu
15、cational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome fro
16、m any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporti
17、ng comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur-rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not
18、able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the r
19、elevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provision
20、s of any IEEE Standards document does not imply compliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is
21、not in compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private us
22、es. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro-motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any r
23、ights in copyright to the documents.PhotocopiesSubject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment
24、of licensing fees, please contact Copyright Clearance Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5Copyrigh
25、t 2017 IEEE. All rights reserved.Updating of IEEE Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An
26、 official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revisi
27、on process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current
28、 edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ ieeexplore .ieee .org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IE
29、EE-SA Website at http:/ standards .ieee .org.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called
30、 to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent
31、applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/ standards .ieee .org/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses
32、under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. Th
33、e IEEE is not re-sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assuranc
34、e, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtaine
35、d from the IEEE Standards Association.6Copyright 2017 IEEE. All rights reserved.ParticipantsAt the time this IEEE guide was completed, the Switchgear Committee Working Group had the following membership:Helmut Heiermeier, ChairZhu Xi, Vice ChairSyed Shahab Uddin AhmedRoy AlexanderMichael AndersonMau
36、ricio AristizibalGeorge BeckerRobert BehlW. J. (Bill) BergmanStan BillingsAnne BosmaSteven BrownArben BufiEldridge ByronGilbert CarmonaStephen CarySteven ChenChih ChowMichael ChristianPatrick Di LilloDenis DufournetEdgar DullniJohn EastmanKenneth EdwardsLeslie FalkinghamThomas FieldVictor Hermosillo
37、Todd IrwinRichard JacksonCory JohnsonStephen LambertHua Ying LiuAlbert LivshitzBill LongGary MartinFrank MayleDavid MitchellGeorges MontilletStephanie MontoyaTom MulcahyJeffrey NelsonMirko PalazzoShawn PattersonThomas PelleritoLise PhanReynaldo RamosAnthony RicciutiJon RogersCharles RossRoderick Sau
38、lsCarl SchuetzJon SchumannDevki SharmaShushil ShindeZachary SmithDon SteigerwaltJames Van de LigtJohn WebbJan WeiskerJiong ZhangThe following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention.Satish AggarwalRoy Alexan
39、derChris AmbroseMauricio AristizabalFicheux ArnaudPaul BarnhartGeorge BartokGeorge BeckerW. J. (Bill) BergmanStan BillingsWilliam BloetheAnne BosmaJeffrey BraggSteven BrownTed BurseWilliam ByrdEldridge ByronPaul CardinalStephen CarySteven ChenChih ChowLucas ColletteStephen ConradMichael CrawfordGlen
40、n DavisGary DonnerRandall DotsonDenis DufournetEdgar DullniDonald DunnDouglas J. EdwardsKenneth EdwardsKeith FlowersRabiz FodaMarcel FortinDoaa GalalFrank GerleveDavid GilmerMietek GlinkowskiEdwin GoodwinJames GrahamRandall GrovesCharles HandJohn HarderJohn HarleyHelmut HeiermeierJeffrey HelzerTodd
41、IrwinAndrew JonesLaszlo KadarJohn KayGael KennedyYuri KhersonskyJames KinneyBoris KoganJames KulchiskySaumen KunduChung-Yiu LamStephen LambertBenjamin LanzJohn LeachHua Ying LiuLi LiuAlbert LivshitzR. LongThomas LundquistOmar MazzoniNigel McQuinPeter MeyerT. David MillsDavid MitchellGeorges Montille
42、tThomas MulcahyJerry MurphyArun Narang7Copyright 2017 IEEE. All rights reserved.Jeffrey NelsonArthur NeubauerMichael NewmanJoe NimsT. W. OlsenLorraine PaddenMirko PalazzoShawn PattersonChristopher PetrolaIulian ProfirMoises RamosReynaldo RamosSamala Santosh ReedyCharles RogersThomas RozekSteven Sano
43、Roderick SaulsBartien SayogoCarl SchneiderCarl SchuetzDevki SharmaSushil ShindeJohn ShullawMichael SigmonVeselin SkendzicMichael SkidmoreJames SmithJeremy SmithR. Kirkland SmithGary StoedterDavid StoneMalcolm ThadenWayne TimmJohn VergisMark WaldronJohn WebbKarl WeberJan WeiskerYingli YenKenneth Whit
44、eJames WilsonLarry YonceJian YuXi ZhuWhen the IEEE-SA Standards Board approved this guide on 22 September 2016, it had the following membership:Jean-Philippe Faure, ChairTed Burse, Vice ChairJohn Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiStephen DukesJianbin Fa
45、nJ. Travis GriffithGary HoffmanRonald W. HotchkissMichael JanezicJoseph L. Koepfinger*Hung LingKevin LuAnnette D. ReillyGary RobinsonMehmet UlemaYingli WenPhilip WinstonHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus8Copyright 2017 IEEE. All rights reserved.IntroductionThis introduction i
46、s not part of IEEE Std C37.0102016, IEEE Guide for AC High-Voltage Circuit Breakers 1000 Vac Rated on a Symmetrical Current Basis.This guide is a revision of IEEE Std C37.010-1999 (Reaff 2005) and contains substantive changes due to the efforts of three coordinated Working Groups on revision and coo
47、rdination of IEEE Std C37.04, IEEE Std C37.09, and IEEE Std C37.010.Although much of the approach of IEEE Std C37.0101999 has been retained, many editorial changes, signif-icant enhancements, and some fundamental changes have been made.Some of the major issues include the following: Some background
48、information and clarification for controlled switching (IEEE Std C37.012). Some background information and clarification for inductive current switching (IEEE Std C37.015).Evaluate existing test data for differing dc time constants (X/R).9Copyright 2017 IEEE. All rights reserved.Contents1. Overview
49、.141.1 Scope 141.2 Purpose .142. Normative references 143. General service conditions 153.1 Usual service conditions .153.2 Unusual service conditions .163.3 Mechanical considerations for outdoor circuit breakers .204. Application considerations 204.1 General .204.2 Maximum voltage for application 214.3 Voltage range factor 214.4 Frequency .214.5 Continuous current .214.6 Rated dielectric withstand 344.7 Standard operating duty 354.8 Interrupting time . 354.9 Permissible tripping delay T (determined by short-time current test duration) .374.10 Reclosing time 384.
