1、 IEEE Guide for Establishing Power Transformer Capability while under Geomagnetic Disturbances Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.163-2015 IEEE Std C57.163-2015 IEEE Guide for Establishing Power Transforme
2、r Capability while under Geomagnetic Disturbances Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 3 September 2015 IEEE-SA Standards Board Abstract: The effects of geomagnetic disturbances (GMD) on power transformers when there is the presence of geomagnetically induced
3、current (GIC) in a power transformer are described. Specification parameters and performance characteristics for power transformers to help minimize the risk and impact when GIC is present in the power system are established. The intent is to provide a background that can help evaluate the effect of
4、 GIC on a power transformer design and its GIC capability. This includes the evaluation techniques to determine the performance characteristics while under the influence of GIC. Keywords: core saturation, design review, geomagnetically induced current (GIC), geomagnetically induced current signature
5、 geomagnetic disturbances (GMD), IEEE C57.163, magnetic, monitoring, temperature gradient, testing, thermal, power transformers The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engin
6、eers, Inc. All rights reserved. Published 26 October 2015. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE dis
7、claims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purch
8、ase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the stand
9、ard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards docu
10、ment, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIR
11、ECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
12、 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in
13、 English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall
14、not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it
15、 clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEE
16、E does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
17、 important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases wher
18、e the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following
19、address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regu
20、latory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed a
21、s doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in
22、private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appr
23、opriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Servic
24、e, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware
25、 that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendmen
26、ts, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the
27、present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-
28、SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be acces
29、sed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by paten
30、t rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is lis
31、ted on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are d
32、emonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducti
33、ng inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
34、 advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the Establishing Power
35、 Transformer Capability while under Geomagnetic Disturbances Working Group had the following membership: Jane Verner, Chair Gary Hoffman, Vice Chair William Bartley, Secretary Raj Ahuja Javier Arteaga Peter Balma Jeffrey Benach David Berrtagnolli Daniel Blayton Juan Castellnos Donald Chu Mohamed Dia
36、by Anthony Franchitti Shawn Galbraith Eduardo Garcia Ramsis Girgis Jeffrey Golarz Jorge Gonzalez de la Vega William Griesacker Ismail Guner Jose Izquierdo Paul Jarman Wayne Johnson Kurt Kaineder Andy Lawless Gustavo Leal So-young Lee Xose Lopez-Fernandez Thomas Lundquist Kumar Mani Robert Mayer Emil
37、ior Morales Cruz David Murray Ali Naderian Sanjay Patel Verena Pellon Brian Penny Donald Platts Johannes Raith Marnie Roussell Roderick Sauls Markus Schiessi Alfons Schrammel Hemchandra Shertukde Shane Smith Andrew Steineman Dejan Susa Mark Tostrud Jason Varnell Kiran Vedante Jos Veens Rogerio Verdo
38、lin Dharman Vir Loren Wagenaar Sukhdev Walia David Wallach Reigh Walling Jeffrey Wright Shuzhen Xu Baitun Yang Waldemar Ziomek The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Stephen
39、Antosz Peter Balma William Bartley Christopher Baumgartner Jeffrey Benach Wallace Binder Thomas Blackburn Thomas Blair Daniel Blaydon William Bloethe William Boettger Kent Brown Paul Cardinal Juan Castellanos Arvind Chaudhary Stephen Conrad John Crouse Willaim Darovny Mohamed Diaby Dieter Dohnal Gar
40、y Donner Fred Elliott Joseph Foldi Marcel Fortin Shawn Galbraith David Gilmer Ramsis Girgis Jalal Gohari James Graham William Griesacker Randall Groves Ajit Gwal Donald Hall John Harley Roger Hayes Gary Hoffman Jill Holmes Philip Hopkinson Randy Horton Richard Jackson Laszlo Kadar Gael Kennedy Sheld
41、on Kennedy James Kinney Zan Kiparizoski Gary Kobet Axel Kraemer Neil Kranich Jim Kulchisky Saumen Kundu John Lackey Marc Lacroix Chung-Yiu Lam Aleksandr Levin Thomas Lundquist J. Dennis Marlow Lee Matthews Omar Mazzoni Susan McNelly John Miller Michael Miller Daniel Mulkey Jerry Murphy Ryan Musgrove
42、 Ali Naderian Jahromi K. R. M. Nair Michael Newman Dhiru Patel Brian Penny Branimir Petosic Donald Platts Alvaro Portillo Iulian Profir Reynaldo Ramos Leslie Recksiedler Jean-Christophe Riboud John Roach Michael Roberts Charles Rogers Oleg Roizman Thomas Rozek Dinesh Sankarakurup Daniel Sauer Roderi
43、ck Sauls Bartien Sayogo Devki Sharma Hemchandra Shertukde Hyeong Sim Jeremy Smith Jerry Smith Gary Smullin Sanjib Som Wayne Stec Michael Swearingen Malcolm Thaden Michael Thompson Mark Tostrud James Van De Ligt Jason Varnell Kiran Vedante John Vergis Jane Verner Loren Wagenaar David Wallach Reigh Wa
44、lling John Wang Joe Watson Kenneth White Jeffrey Wright Kipp Yule Waldemar Ziomek When the IEEE-SA Standards Board approved this guide on 3 September 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Se
45、cretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phili
46、p Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2015 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std C57.163-2015, IEEE Guide for Establishing Power Transformer Capability while under Geomagnetic Disturbances. This guide has been developed to
47、 address the global impact of geomagnetic disturbances (GMD) on the reliable operation of bulk electric system (BES) including power transformers. The Standards Subcommittee of the IEEE Power and Energy Society Transformers Committee responded by assembling a working group to develop this guide. The
48、 intent of this guide is to provide a common framework for considering the capability of power transformers while under the impact of geomagnetic disturbances. This IEEE Transformer Committee guide is the first industry document of its type and facilitates the evaluation and understanding of perform
49、ance of transformers under GMD conditions. Copyright 2015 IEEE. All rights reserved. viii Contents 1. Overview 1 1.1 Scope . 1 2. Normative references 2 3. Definitions 2 4. Background 3 5. Effects of GIC on power transformers 4 5.1 Basics of the effects of dc on power transformers . 4 5.2 Additional var demand and current harmonics associated with GIC . 7 5.3 Thermal effects of GIC 8 5.4 Other effects of GIC in transformers . 8 6. Thermal response of transformers to GIC 8 6.1 Thermal effects of dc current . 8 6.2 Typical signature/profile of GIC.13 6.3 The effect of the short
