1、27 January 2006 SH94621IEEE Std C57.18.10-1998(R2003)(Revision and redesignation ofANSI/IEEE C57.18-1964)Errata to IEEE Standard Practice andRequirements for SemiconductorPower Rectifier TransformersSponsorTransformer Committeeof theIEEE Power Engineering SocietyCorrection SheetIssued 27 January 200
2、6Copyright 2006 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved.Published 2006. Printed in the United States of America.This correction sheet may be freely reproduced and distributed in order to maintain the utility and currencyof the underlying Standard. This corr
3、ection sheet may not be sold, licensed or otherwise distributed for anycommercial purposes whatsoever. The content of this correction sheet may not be modified.Correction Sheet to IEEE Std C57.18.10-1998SH94621 27 January 2006Page 29, Figure 6Rectifier circuits (double-way circuits) (Continued), sho
4、uld be renumbered asfollows:Figure 5Rectifier circuits (double-way circuits) (Continued)Page 30, Figure 7Rectifier circuits (multiple circuits, single-way), should be renumbered as follows:Figure 6Rectifier circuits (multiple circuits, single-way)Page 31, Figure 8Rectifier circuits (multiple circuit
5、s, single-way) (Continued), should berenumbered as follows:Figure 6Rectifier circuits (multiple circuits, single-way) (Continued)Page 32, Figure 9Rectifier circuits (miscellaneous circuits), should be renumbered as follows:Figure 7Rectifier circuits (miscellaneous circuits)Page 49, Table A.112700 kV
6、A (fundamental), dry-type transformer, 150 rise, aluminum windings,should be renumbered as follows:Table A.12700 kVA (fundamental), dry-type transformer, 150 rise, aluminum windingsPage 50, Table A.12Load current harmonic spectrum for two-winding transformer, should berenumbered as follows:Table A.2Load current harmonic spectrum for two-winding transformerPage 50, Table A.13Harmonic loss factors for two-winding transformer, should be renumbered asfollows:Table A.3Harmonic loss factors for two-winding transformer
