1、 Reference number ISO 13584-511:2006(E) ISO 2006INTERNATIONAL STANDARD ISO 13584-511 First edition 2006-12-15 Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use Reference dictionary for fasteners Systmes dautomatisation industriell
2、e et intgration Bibliothque de composants Partie 511: Systmes mcaniques et composants pour utilisation gnrale Dictionnaire de rfrence pour lments de fixation ISO 13584-511:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may b
3、e printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts
4、 no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the f
5、ile is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any for
6、m or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09
7、47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2006 All rights reservedISO 13584-511:2006(E) ISO 2006 All rights reserved iiiContents Page1 Scope 1 2 Normative references 2 3 Terms, definitions, and abbreviations .2 4 Representation of ontology concepts as dictionaries en
8、tries 7 4.1 Fastener class .7 4.1.1 Modelled class 7 4.1.2 Referenced classes 9 4.1.3 Used attributes9 4.1.4 Layout10 4.2 Property DET definitions 12 4.2.1 Modelled date types .12 4.2.2 Imported properties12 4.2.3 Used attributes12 4.2.4 Layout13 4.3 Data type definitions.14 4.3.1 Data type properti
9、es.14 4.3.2 Used attributes15 4.4 Rules for formulating class and property definitions15 5 Classification principles .15 5.1 Connection to pre-existing classification.15 5.2 Upper level of the hierarchy.15 5.3 Lower level of the hierarchy.15 5.4 Coding style.16 5.5 General and classification propert
10、y 16 5.5.1 General property.16 5.5.2 Classification property.16 6 Computer sensible description 17 6.1 External file17 6.2 Information model and conformance class17 Annex A (normative) Information object registration 22 A.1 Document identification .22 A.2 Dictionary identification .22 Annex B (norma
11、tive) Classification tables .23 Annex C (normative) Fastener class definitions 37 Annex D (normative) Fastener property DET definitions 73 D.1. Property DET definition imported from IEC 61360-473 D.2. Property DET definition defined in this part of ISO 13584 73 Annex E (normative) Classification mec
12、hanism 103 ISO 13584-511:2006(E) iv ISO 2006 All rights reservedE.1 Classification property DETs and values103 E.2 Classification methodology and property reference mechanism 105 Annex F (normative) Computer sensible representation of the fastener dictionary 132 Annex G (informative) Simplified draw
13、ings of feature classes, component classes and some properties .133 Bibliography .170 Index176 Figures Figure 1 Item_class under fastener class in this part of ISO 13584 .8 Figure 2 The structure of externally threaded fastener class .9 Figure 3 Layout of class definition 11 Figure 4 Position and so
14、me inherited properties of class P511AAA340 .11 Figure 5 Layout of property DET definition.14 Figure 6 Coding style 16 Figure 7 External reference mechanism17 Tables Table B.1 Classification structure of classes .23 Table E.1 Classification property DETs and values .103 Table E.2 Classification meth
15、odology and property reference mechanism 105 Table G.1 Simplified drawings of classes .133 ISO 13584-511:2006(E) ISO 2006 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of pre
16、paring International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in
17、 liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC directives, Part 2. Draft Interna
18、tional Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may b
19、e the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13584-511 was prepared by Technical Committee ISO/TC 184, Industrial automation systems and integration, Subcommittee SC 4, Industrial data. ISO 13584 consists of the following parts,
20、 under the general title Industrial automation systems and integration Parts library: Part 1: Overview and fundamental principles; Part 20: Logical resource: Logical model of expressions; Part 24: Logical resource: Logical model of supplier library; Part 25: Logical resource: Logical model of suppli
21、er library with aggregate values and explicit content; Part 26: Logical resource: Information supplier identification; Part 31: Implementation resource: Geometric programming interface; Part 42: Description methodology: Methodology for structuring part families; Part 101: Geometric view exchange pro
22、tocol by parametric program; Part 102: View exchange protocol by ISO 10303 conforming specification; Part 501: Reference dictionary for measuring instruments: Registration procedure; Part 511: Mechanical systems and components for general use: Reference dictionary for fasteners. The structure of the
23、 ISO 13584 series is described in ISO 13584-1. The numbering of the parts of ISO 13584 reflects its structure: ISO 13584-511:2006(E) vi ISO 2006 All rights reserved Parts 10 to 19 specify the conceptual descriptions; Parts 20 to 29 specify the logical resources; Parts 30 to 39 specify the implementa
24、tion resources; Parts 40 to 49 specify the description methodology; Parts 100 to 199 specify the view exchange protocols; Parts 500 to 599 specify the reference dictionaries. Should further parts of ISO 13584 be published, they will follow the same numbering pattern. ISO 13584-511:2006(E) ISO 2006 A
25、ll rights reserved viiIntroduction ISO 13584 is an International Standard for the computer interpretable representation and exchange of parts library data. The objective is to provide a neutral mechanism capable of transferring parts library data, independent of any application that is using a parts
26、 library data system. The nature of this description makes it suitable not only for the exchange of files containing parts, but also as a basis for implementing and sharing databases of parts library data. This International Standard is organized as a series of parts, each published separately. The
27、parts of ISO 13854 fall into one of the following series: conceptual descriptions, logical resources, implementation resources, description methodology, view exchange protocol, and reference dictionaries. The series are described in ISO 13584-1. This part of ISO 13584 is a member of the reference di
28、ctionaries series. The reference dictionaries series of parts of ISO 13584 specify ontologies for representing the entities of an application domain, together with their descriptive properties and domains of values. Each entity, property or domain of values constitutes an entry of a dictionary that
29、is the formal and computer sensible representation of the specified ontology. It is associated with a computer sensible and human readable definition, and with a computer sensible identification. Identification of a dictionary entry allows for unambiguous reference from any application. Definitions
30、and identifications of dictionary entries consist of instances of the EXPRESS entity data types defined in the common dictionary schema, or in its extensions defined in the logical series of parts of ISO 13584. This part of ISO 13584 specifies a reference dictionary for representing fasteners with t
31、heir properties and domains of values, as they are described in the various ISO mechanical fastener standards. The definitions of classes and properties in this fastener dictionary are referenced from: various ISO standards (see Bibliography); the Federal Item Identification Guide; Machinerys Handbo
32、ok (26th Edition). INTERNATIONAL STANDARD ISO 13584-511:2006(E)ISO 2006 All rights reserved 1Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use: Reference dictionary for fasteners 1 Scope This part of ISO 13584 specifies a referenc
33、e dictionary for all the parts described in the various ISO mechanical fastener standards, together with their descriptive properties and domains of values. This part of ISO 13584 specifies a reference dictionary that contains: definitions and identifications of the classes of fasteners as they are
34、described in the various ISO mechanical fastener standards, with associated classification schemes; definitions and identifications of data element types that represents properties of fasteners, and definitions and identifications of domains of values that help to describe the above data element typ
35、es. Each class, property or domain of values of this application domain constitutes an entry of the reference dictionary defined in this part of ISO 13584. It is associated with a computer sensible and human-readable definition, and with a computer sensible identification. Identification of a dictio
36、nary entry allows for unambiguous reference from any application. Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, and in its extensions defined in ISO 13584
37、-24 and ISO 13584-25. The following are within the scope of this part of ISO 13584: standard data that represents the classes of fasteners; standard data that represents the properties of fasteners; standard data that represents domains of values used for properties of fasteners. The following are o
38、utside the scope of this part of ISO 13584: methodology for structuring parts families used for specifying standard data defined in this part of ISO 13584; implementation method by which the standard data defined in this part of ISO 13584 may be exchanged. ISO 13584-511:2006(E) 2 ISO 2006 All rights
39、 reservedNOTE The structure of the physical file used for exchanging the standard data defined in this part of ISO 13584 is specified in ISO 10303-21. Such a physical file containing all the fastener standard data is also provided as Annex F of this part of ISO 13584. 2 Normative references The foll
40、owing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1891: 1979, Bolts, screws, nuts and accessories Termi
41、nology and nomenclature. ISO/IEC 8824-1, Information technology Abstract Syntax Notation One (ASN.1) Part 1: Specification of basic notation. ISO 10303-1:1994, Industrial automation systems and integration Product data representation and exchange Part 1: Overview and fundamental principles. ISO 1030
42、3-11:1994, Industrial automation systems and integration Product data representation and exchange Part 11: Description methods: The EXPRESS language reference manual. ISO 10303-21, Industrial automation systems and integration Product data representation and exchange Part 21: Implementation methods:
43、 Clear text encoding of the exchange structure. ISO 13584-1:2001, Industrial automation systems and integration Parts library Part 1: Overview and fundamental principles. ISO 13584-24:2003, Industrial automation systems and integration Parts library Part 24: Logical resources: Logical model of suppl
44、ier library. ISO 13584-25, Industrial automation systems and integration Parts library Part 25: Logical resources: Logical model of supplier library with aggregate values and explicit content. ISO 13584-42:1998, Industrial automation systems and integration Parts library Part 42: Description methodo
45、logy: Methodology for structuring part families. IEC 61360-4:1997, Standard data element types with associated classification scheme for electric components Part 4: IEC reference collection of standard data element types and component classes. 3 Terms, definitions, and abbreviations For the purposes
46、 of this document, the following terms, definitions and abbreviations apply. Some of these terms and definitions are repeated for convenience from: ISO 10303-1:1994; ISO 10303-11:1994; ISO 13584-1:2001; ISO 13584-24:2003; ISO 13584-42:1998. ISO 13584-511:2006(E) ISO 2006 All rights reserved 33.1 Ter
47、ms and definitions 3.1.1 applicable property a property that is defined for some family of parts and that shall apply to any part that belongs to this family of parts ISO 13584-24:2003 EXAMPLE For a screw generic family of parts, the thread diameter is an applicable property: this characteristic app
48、lies to any screw. 3.1.2 basic semantic unit (BSU) the entity that provides an absolute and universal identification of certain objects of the application domain ISO 13584-42:1998 EXAMPLE Classes, data element types. 3.1.3 characteristic of a part (part characteristic) a constant property, character
49、istic of a part, of which the value is fixed once the part is defined ISO 13584-24:2003 NOTE Changing the value of a characteristic of a part would mean changing the part. EXAMPLE For a washer, the nominal and outside diameters are part characteristics. 3.1.4 common dictionary schema the information model for a dictionary, using the EXPRESS modelling language, resulting from a joint effort between I
