1、 ISO 2015 Cranes Safety requirements for loader cranes AMENDMENT 1 Appareils de levage charge suspendue Exigences de scurit pour les grues de chargement AMENDEMENT 1 INTERNATIONAL STANDARD ISO 15442 Second edition 2012-11-15 Reference number ISO 15442:2012/Amd.1:2015(E) AMENDMENT 1 2015-11-01 ISO 15
2、442:2012/Amd.1:2015(E)ii ISO 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including
3、photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +
4、41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 15442:2012/Amd.1:2015(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carri
5、ed out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. I
6、SO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the differen
7、t approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may b
8、e the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents)
9、 Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles
10、 in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 96, Cranes, Subcommittee SC 6, Mobile cranes. ISO 2015 All rights reserved iii Cranes Safety requirements for loader cranes AMENDMENT 1 Page 9,
11、Formula (3) Replace the formula by the following: 3 11 mm (3) Page 12, Table 3 Replace the table column headings by the following, thereby changing the symbols in the “Load comb. B” and “Load comb. C” column headings and deleting both the “Row” heading and column entirely: Load cate- gory Load Load
12、comb. A Load comb. B Load comb. C p A1 A2 p B1 B2 p C1 C3 In table footnote b, replace “rows 3 and 4” by Acceleration of slewing drive Page 49, Annex E Replace the text of subclause E.3.1 with the following: The stop function shall conform to ISO 13849-1. ISO 15442:2012/Amd.1:2015(E) ISO 2015 All rights reserved 1 ISO 15442:2012/Amd.1:2015(E) ISO 2015 All rights reserved IC S 53.020.20 Price based on 1 page
