1、 ISO 2013 Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications AMENDMENT 1 Matriels pour la construction et lentretien des routes Machines coffrage glissant Dfinitions et spcifications commerciales AMENDEMENT 1 INTERNATIONAL STANDARD ISO 16039 First e
2、dition 2004-04-15 Reference number ISO 16039:2004/Amd.1:2013(E) AMENDMENT 1 2013-01-15 ISO 16039:2004/Amd.1:2013(E)ii ISO 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any f
3、orm or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 0
4、9 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO 16039:2004/Amd.1:2013(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally c
5、arried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wor
6、k. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Inter
7、national Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of th
8、e elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Amendment 1 t o ISO 16039:2004 was prepared by Technical Committee ISO/TC 195, Building construction machinery and equipment. ISO 2013 All rights reserved
9、 iii Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications AMENDMENT 1 Cover page, French title Replace the French version of the title of ISO 16039:2004 by Matriels pour la construction et lentretien des routes Machines coffrage glissant Dfinitions et
10、 spcifications commerciales thereby substituting the term “Machines coffrage glissant” for “Machines pour le pavage”. Page 4, 4.4.1 Basic equipment In the third list item, replace “width” by “width and depth”. Page 5, 6.3.2, Specifications In the ninth list item, replace “crawler plates” by “track p
11、ads”. Page 7, 6.8, Additional features of a slipform paver In the ninth list item, replace “rubber” by “non-metallic (e.g. rubber, polyurethane) or steel”. Page 8, 6.9, Additional equipment In the fourth list item, add “or plough” immediately after “auger”. Page 10, Figure A.2 In item no. 14 in the legend to Figure A.2, d e l e te th e a b b re vi a ti o n “H F” s o th a t th e k e y i te m re a ds simply “vibrators”. ISO 16039:2004/Amd.1:2013(E) ISO 2013 All rights reserved 1 ISO 16039:2004/Amd.1:2013(E) ISO 2013 All rights reserved ICS 01.040.91; 93.080.10 Price based on 1 page
