1、 ISO 2013 Laminated veneer lumber (LVL) Specifications AMENDMENT 1 Lamibois (LVL) Spcifications AMENDEMENT 1 INTERNATIONAL STANDARD ISO 18776 First edition 2008-02-01 Reference number ISO 18776:2008/Amd.1:2013(E) AMENDMENT 1 2013-06-15 ISO 18776:2008/Amd.1:2013(E)ii ISO 2013 All rights reserved COPY
2、RIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permi
3、ssion. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO 18776:
4、2008/Amd.1:2013(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a su
5、bject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (
6、IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should b
7、e noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying
8、any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents Any trade name used in this document is information given for the convenience of users
9、 and does not constitute an endorsement. The committee responsible for this document is ISO/TC 89, Wood based panels , Subcommittee SC 3, Plywood. Amendment 1 to ISO 18776:2008 replaces, for assessment of the bonding quality, normative references ISO 12466-1 and ISO 12466-2 with normative references
10、 ISO 10033-1 and ISO 10033-2. ISO 2013 All rights reserved iii Laminated veneer lumber (LVL) Specifications AMENDMENT 1 Page 2, Clause 3 In the list of normative references, replace “ISO 12466-1, Plywood Bonding quality Part 1: Test methods” and “ISO 12466-2, Plywood Bonding quality Part 2: Requirem
11、ents” by ISO 10033-1, Laminated Veneer Lumber (LVL) Bonding quality Part 1: Test methods ISO 10033-2, Laminated Veneer Lumber (LVL) Bonding quality Part 2: RequirementsPage 4, Clause 6 Replace the text of the clause with the following: The bonding quality shall be established in accordance with ISO 10033-1 and ISO 10033-2.Page 13, Bibliography Delete “2 ISO 10033, Laminated Veneer Lumber Bond quality testing and evaluation methods”. ISO 18776:2008/Amd.1:2013(E) ISO 2013 All rights reserved 1 ISO 18776:2008/Amd.1:2013(E) ISO 2013 All rights reserved ICS 79.060.99 Price based on 1 page
