1、 ISO 2015 Space data and information transfer systems Space packet protocol AMENDMENT 1 Systmes de transfert des donnes et informations spatiales Protocole pour donnes spatiales par paquets AMENDEMENT 1 INTERNATIONAL STANDARD ISO 22646 Reference number ISO 22646:2005/Amd.1:2015(E) First edition 2005
2、07-15 AMENDMENT 1 2015-07-15ISO 22646:2005/Amd.1:2015(E)ii ISO 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, e
3、lectronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214
4、Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgISO 22646:2005/Amd.1:2015(E) ISO 2015 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodie
5、s). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and n
6、on-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Pa
7、rt 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies castin
8、g a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 22646 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCS
9、DS 133.0-B-1, September 2012) and was adopted (without modifications except those stated in clause 2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 13, Space data and information transfer systems. Recommended Standard CCSDS 133.0-B-1 AM
10、ENDMENT 1 Issue Date: September 2010 & September 2012 Space Packet Protocol AMENDMENT 1 The Management Council of the Consultative Committee for Space Data Systems (CCSDS) has authorized the publication of amendment 1 to CCSDS 133.0-B-1, issued September 2003. Page 1-5 Subsection 1.7 REFERENCES, cha
11、nge from: 4 Space Link Identifiers. Recommendation for Space Data System Standards, CCSDS 135.0-B-1. Blue Book. Issue 1. Washington, D.C.: CCSDS, January 2002. to: 4 “Registries.” Space Assigned Number Authority. http:/sanaregistry.org/r/. Page 2-3 Subsection 2.1.3, add new paragraph at end of subse
12、ction: “Earlier specifications (references B2 and B3) of the TM Space Data Link Protocol and TC Space Data Link Protocol did not use the concept of an LDP, and the Application Process Identifier was specified as identifying the on-board sending or receiving application process. This recommended stan
13、dard includes this earlier specification of the use of the field. However, in order to cover the cases where an APID Qualifier is used, the term Path ID is used in many instances where the earlier specifications referred to the APID.” Page 4-4 Subsection 4.1.2.2, before paragraph 4.1.2.3.4.3, insert
14、 new paragraph 4.1.2.3.4.3: “4.1.2.3.4.3 The APID may uniquely identify the individual sending or receiving application process within a particular space vehicle.” renumber former paragraph 4.1.2.3.4.3 as 4.1.2.3.4.4 add number 4.1.2.3.4.5 to unnumbered paragraph following 4.1.2.3.4.4 Distribution C
15、ontrol Number: TC 10-20 Reference Number: CCSDS 133.0-B-1 Cor. 1 Distribution Control Number: TC 12-27 Reference Number: CCSDS 133.0-B-1 Cor. 2 NOTE Current versions of CCSDS documents are maintained at the CCSDS Web site: http:/www.ccsds.org/ Correspondence regarding CCSDS documents should be addre
16、ssed to CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 2015 All rights reserved 1 ISO 22646:2005/Amd.1:2015(E)ISO 22646:2005/Amd.1:2015(E) ISO 2015 All rights reserved IC S 49.140 Price based on 1 page
