1、 ISO 2017 Rubber, vulcanized or thermoplastic Determination of resistance to abrasion using a driven, vertical abrasive disc AMENDMENT 1 Caoutchouc, vulcanis ou thermoplastique Dtermination de la rsistance labrasion au moyen dun disque abrasif vertical, motoris AMENDEMENT 1 INTERNATIONAL STANDARD IS
2、O 23233 Second edition 2016-03-01 Reference number ISO 23233:2016/Amd.1:2017(E) AMENDMENT 1 2017-03 ISO 23233:2016/Amd.1:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、 may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of
4、the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 23233:2016/Amd.1:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of nati
5、onal standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internat
6、ional organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intend
7、ed for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .
8、iso .org/ directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document
9、 will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, th
10、e meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: w w w . i s o .org/ iso/ foreword .html This document was pre
11、pared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. ISO 2017 All rights reserved iii Rubber, vulcanized or thermoplastic Determination of resistance to abrasion using a driven, vertical abrasive disc AMENDMENT 1Subclause 9.3, Table 3 Replace T
12、able 3 with the following which includes modified powder feed rate values. Table 3 Test conditions for each abrasion run Abrasion run Load Slip angle Rotational speed Distance run Powder feed rateN km/h m units 1 75 16 25 250 40 2 75 16 12 140 25 3 75 13 2,5 200 7 4 75 9 25 600 14 5 75 9 12 600 9 6
13、75 9 2,5 600 3 7 75 5,5 25 2 500 5 8 75 5,5 12 1 500 3 9 75 5,5 2,5 1 400 2 10 75 5,5 2,5 1 400 2 11 75 5,5 12 1 500 3 12 75 5,5 25 2 500 5 13 75 9 2,5 600 3 14 75 9 12 600 9 15 75 9 25 600 14 16 75 13 2,5 200 7 17 75 16 12 140 25 18 75 16 25 250 40 ISO 23233:2016/Amd.1:2017(E) ISO 2017 All rights reserved 1 ISO 23233:2016/Amd.1:2017(E) ISO 2017 All rights reserved IC S 83.060 Price based on 1 page
