1、 ISO 2014 Thermal insulating products for building applications Determination of short-term water absorption by partial immersion AMENDMENT 1 Produits isolants thermiques destins aux applications du btiment Dtermination de labsorption deau court terme par immersion partielle AMENDEMENT 1 INTERNATION
2、AL STANDARD ISO 29767 First edition 2008-11-01 Reference number ISO 29767:2008/Amd.1:2014(E) AMENDMENT 1 2014-12-01 ISO 29767:2008/Amd.1:2014(E)ii ISO 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be re
3、produced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the reques
4、ter. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO 29767:2008/Amd.1:2014(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of nation
5、al standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internatio
6、nal organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended
7、 for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso
8、.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will
9、 be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and express
10、ions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 163, Thermal performance and energy use
11、in the built environment, Subcommittee SC 1, Test and measurement methods. ISO 2014 All rights reserved iii ISO 29767:2008/Amd.1:2014(E)iv ISO 2014 All rights reserved Thermal insulating products for building applications Determination of short-term water absorption by partial immersion AMENDMENT 1
12、Page V, Introduction Replace the existing Introduction with the following: This International Standard comprises the original EN 1609:1996, EN 1609:1996/AC:1997 and EN 1609:1996/A1:2006 prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products, which have been amended by I
13、SO/TC 163/SC 1 with reference to conditioning and testing conditions in tropical countries. This International Standard is one of a series of documents specifying test methods, based on existing European Standards, that are being adopted by ISO. This “package” of standards includes the following gro
14、up of interrelated documents. ISO standard Title Respective EN standard ISO 12344 Thermal insulating products for building applications Determination of bending behaviour EN 12089 ISO 12968 Thermal insulation products for building applications Determination of the pull-off resistance of external the
15、rmal insulation composite sys- tems (ETICS) (foam block test) EN 13495 ISO 29465 Thermal insulating products for building applications Determination of length and width EN 822 ISO 29466 Thermal insulating products for building applications Determination of thickness EN 823 ISO 29467 Thermal insulati
16、ng products for building applications Determination of squareness EN 824 ISO 29468 Thermal insulating products for building applications Determination of flatness EN 825 ISO 29469 Thermal insulating products for building applications Determination of compression behaviour EN 826 ISO 29470 Thermal in
17、sulating products for building applications Determination of the apparent density EN 1602 ISO 29471 Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity or in tropical countries 2
18、7 C/65 % relative humidity) EN 1603 ISO 29472 Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity con- ditions EN 1604 ISO 29767:2008/Amd.1:2014(E) ISO 2014 All rights reserved 1 ISO 29767:2008/Amd.1:2014(E) ISO standa
19、rd Title Respective EN standard ISO 29764 Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature condi- tions EN 1605 ISO 29765 Thermal insulating products for building applications Determination of tensile strength perpend
20、icular to faces EN 1607 ISO 29766 Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1608 ISO 29767 Thermal insulating products for building applications Determination of short-term water absorption by partial immersion EN 1609 ISO 29768 Ther
21、mal insulating products for building applications Determination of linear dimensions of test specimens EN 12085 ISO 29769 Thermal insulating products for building applications Determination of behaviour under point load EN 12430 ISO 29770 Thermal insulating products for building applications Determi
22、nation of thickness for floating-floor insulating products EN 12431 ISO 29771 Thermal insulating materials for building applications Determination of organic content EN 13820 ISO 29803 Thermal insulation products for building applications Determination of the resistance to impact of external thermal
23、 insulation composite systems (ETICS) EN 13497 ISO 29804 Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material EN 13494 ISO 29805 Thermal insulation products for building applications D
24、etermination of the mechanical properties of glass fibre meshes EN 13496 ISO 16534 Thermal insulating products for building applications Determination of compressive creep EN 1606 ISO 16535 Thermal insulating products for building applications Determination of long-term water absorption by immersion
25、 EN 12087 ISO 16536 Thermal insulating products for building applications Determination of long-term water absorption by diffusion EN 12088 ISO 16537 Thermal insulating products for building applications Determination of shear behaviour EN 12090 ISO 16544 Thermal insulating products for building app
26、lications Conditioning to moisture equilibrium under specified temperature and humidity condi- tions EN 12429 ISO 16545 Thermal insulating products for building applications Determination of behaviour under cyclic loading EN 13793 ISO 16546 Thermal insulating products for building applications Deter
27、mination of freezethaw resistance EN 120912 ISO 2014 All rights reserved ISO 29767:2008/Amd.1:2014(E) A further series of existing European Standards on test methods for products used to insulate building equipment and industrial installations was adopted by ISO. This “package” of standards comprise
28、s the following group of interrelated standards: ISO standard Title Respective EN standard ISO 12623 Thermal insulating products for building equipment and industrial installations Determination of short-term water absorption by partial immersion of preformed pipe insulation EN 13472 ISO 12624 Therm
29、al insulation products Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13468 ISO 12628 Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insula
30、tion EN 13467 ISO 12629 Thermal insulating products for building equipment and industrial installations Determination of water vapour transmission properties of preformed pipe insulation EN 13469 ISO 18096 Thermal insulating products for building equipment and industrial installations Determination
31、of maximum service temperature for preformed pipe insulation EN 14707 ISO 18097 Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature EN 14706 ISO 18098 Thermal insulating products for building equipment and industrial installati
32、ons Determination of the apparent density of preformed pipe insulation EN 13470 ISO 18099 Thermal insulating products for building equipment and industrial installations Determination of the coefficient of thermal expansion EN 13471 The Application of Agreement on technical cooperation between ISO a
33、nd CEN (Vienna Agreement), Modes 1, 2, 4, and 5, was not approved by CEN/TC 88 and the necessity not seen by its stakeholders. Page 1, subclause 4.3 Add the following second paragraph: 4.3 Tap water, adjusted to a temperature of (23 5) C. In tropical countries, different conditions and testing conditions can be relevant. In such cases, the temperature shall be (27 5) C, and this shall be stated in the test report. ISO 2014 All rights reserved 3 ISO 29767:2008/Amd.1:2014(E) ISO 2014 All rights reserved IC S 91.100.60 Price based on 3 pages
