JIS T 8155-2014 8125 Compressed air open-circuit self-contained breathing apparatus《压缩空气开路自含式呼吸器》.pdf

相关资源

JIS B8392-2-2000 压缩空气.第2部分气溶胶油含量的试验方法1.pdf

JIS D6605-1994 载重牵引车及拖车的压缩空气制动联接器.pdf

JIS B8378-1-2000 气液动力.压缩空气润滑器.第1部分包括在供应商资料中的主要特性和产品标记要求.pdf

JIS B8378-2-2000 气液动力.压缩空气润滑器.第2部分预定列入供应商资料中的产品主要特性的测定试验方法.pdf

JIS B8392-3-2001 压缩空气.第3部分湿度测量的试验方法.pdf

JIS B8392-4-2003 压缩空气.第4部分固体颗粒含量的试验方法.pdf

JIS B8392-5-2005 压缩空气.第5部分油蒸气和有机溶剂含量的试验方法.pdf

JIS B8391-1-2000 压缩空气干燥器.第1部分规范和试验.pdf

JIS B8391-1-2010 压缩空气干燥器.第1部分：规范和试验.pdf

JIS B8391-2-2000 压缩空气干燥器.第2部分性能比.pdf

猜你喜欢

ASTM C1245 C1245M-2012 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)《测定硬化碾压混凝土和其他硬化粘结混合物间粘合强度的标准试验方.pdf

ASTM C1246-2000(2006) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2000(2012) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure 《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2017 Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《固后弹性体密封剂热老化影响重量损失 开裂和粉化的标准试验方法》.pdf

ASTM C1247-1998(2004) Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf

ASTM C1247-2009 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命的标准试验方法》.pdf

ASTM C1247-2014 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf

ASTM C1248-2006 Standard Test Method for Staining of Porous Substrate by Joint Sealants《用接缝密封胶着色多孔衬底的标准试验方法》.pdf

ASTM C1248-2008 Standard Test Method for Staining of Porous Substrate by Joint Sealants《用接缝密封胶着色多孔衬底的标准试验方法》.pdf