JB T 11777 2-2017 《内燃机 铸造铝合金气缸盖 第2部分 毛坯》.pdf

相关资源

JB T 9753.2-2008 内燃机 气缸盖与机体 第2部分 铸铁气缸盖 技术条件.pdf

JB T 9753.2-2008 内燃机.气缸盖与机体.第2部分 铸铁气缸盖.技术条件.pdf

JB T 9753.3-2011 内燃机.气缸盖与机体.第3部分：灰铸铁气缸盖和机体铸件.技术条件.pdf

TB T 3475.7-2020 机车、动车组柴油机零部件 第7部分：气缸盖.pdf

JB T 9753.3-2011 内燃机 气缸盖与机体 第3部分 灰铸铁气缸盖和机体铸件 技术条件.pdf

JB T 7293.7-2015 内燃机 螺栓与螺母 第7部分 气缸盖螺母及飞轮螺母 技术条件.pdf

JB T 9753.1-2011 内燃机.气缸盖与机体.第1部分：铸铁机体.技术条件.pdf

JB T 7293.5-2015 内燃机 螺栓与螺母 第5部分 气缸盖螺栓 技术条件.pdf

JB T 9753.1-2011 内燃机 气缸盖与机体 第1部分 铸铁机体 技术条件.pdf

猜你喜欢

ASTM F2561-2011 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner《恢复下水道服务及其使用一件.pdf

ASTM F2561-2016 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner《采用一件式主体和横向现场固.pdf

ASTM F2561-2017 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner《使用整体式主衬里和侧向就地.pdf

ASTM F2562 F2562M-2007 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage.pdf

ASTM F2562 F2562M-2008 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage《非压力排水和排污用增强钢热塑加肋管及其配件的标准规范》.pdf

ASTM F2562 F2562M-2015 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage《无压排水和污水处理用钢加固热塑加肋管和配件规格》.pdf

ASTM F2563-2006 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation《娱乐用主要预期飞行器工具组件用法说明的标准实施规程》.pdf

ASTM F2563-2006(2010) Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation《娱乐用飞机工具箱装配说明书》.pdf

ASTM F2563-2016 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation《主要拟用于娱乐的飞机工具箱装配说明书的标准实施规程》.pdf