SJ 21210-2016 《倒装焊机工艺验证方法》.pdf

相关资源

SJ 21052-2016 凸点倒装焊机通用规范.pdf

SJ 21052-2016 凸点倒装焊机通用规范.pdf

SJ 3094-1988 冷冲模 倒装复合厚凹模典型结构.pdf

JB T 8747-1998 手工钨极惰性气体保护弧焊机（TIG焊机）技术条件.pdf

SN T 4124-2015 进出口电焊机检验技术要求 电焊机的能效.pdf

JB T 8747-1998 手工钨极惰性气体保护弧焊机(TIG焊机)技术条件.pdf

JB 5250-1991 缝焊机.pdf

GB 10977-1989 摩擦焊机.pdf

SJ Z 21356-2018 《SiP产品芯片倒装工艺设计指南》.pdf

猜你喜欢

ITU-R QUESTION 2265-2000 Characteristics of and protection criteria for radars operating in the radiodetermination service《雷达无线电服务操作的特点和保护标准》.pdf

ITU-R QUESTION 2267-1997 Frequency sharing between the radio astronomy service and other services in bands above 70 GHz《无线电天文学服务与其他服务在70千兆赫以上频段之间的频率共享》.pdf

ITU-R QUESTION 227-13-2002 HF channel simulation《短波信道仿真》.pdf

ITU-R QUESTION 2274-2000 Technical and operational characteristics of emergency communications in the mobile-satellite service《移动卫星业务中应急通信的技术和业务特点》.pdf

ITU-R QUESTION 228-13-2005 Propagation data required for the planning of radiocommunication systems operating above 275 GHz《传输数据的无线电通信系统运行在275千兆赫的规划要求》.pdf

ITU-R QUESTION 229-13-2009 Prediction of sky-wave propagation conditions signal intensity circuit performance and reliability at frequencies between about 1 6 and 30 MHz in particun.pdf

ITU-R QUESTION 229-25-2008 Future development of the terrestrial component of IMT《国际移动通行地面组件的未来发展》.pdf

ITU-R QUESTION 230-13-2009 Prediction methods and models applicable to power line telecommunications systems《适用于电力线通信系统的预测方法和模型》.pdf

ITU-R QUESTION 230-17-2010 Preferred frequency bands and protection criteria for radio astronomy measurements in space《空间射电天文测量的优选波段和防护标准》.pdf