SN 234 344-1978 Grundlage der vorliegenden Norm ist die von der internationa-len Organisation für Normung ISO herausgegebene Internatio-nale Norm ISO 1641 1 ■ 1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3407-1982 镶硬质合金刀片的加垫式内排屑深孔镗刀D=51~149mm.pdf

HB 3408-1982 导向块垫片H=0.6~2.1mm.pdf

HB 3409-1982 支承垫片H=0.6~2.1mm.pdf

HB 3410-1982 镶硬质合金刀片的内排屑深孔镗刀技术条件.pdf

HB 3411-1983 粗车涡轮盘用45°车刀.pdf

HB 3412-1983 半精车涡轮盘用50°车刀.pdf

HB 3413-1983 精车涡轮盘用63°车刀.pdf

HB 3414-1983 租车涡轮轴用75°车刀.pdf

HB 3415-1983 半精车涡轮轴用45°车刀.pdf