SN ISO 105 P01-1984 TextilesTests for colour fastnessSection E03 Colour fastness to chlorinated water (swimming-bath water)《较短的盖形螺母和mg 米制 ISO 螺纹 M 4 至 M 39》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

IEC 60731-2011 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy《医用电气设备.放射治疗中使用的带电离室的剂量仪》.pdf

IEC 60732-1982 Measuring methods for cylinder cores tube cores and screw cores of magnetic oxides《磁性氧化物圆柱形、管形和螺纹磁芯的测量方法》.pdf

IEC 60735-1991 Measuring methods for video tape properties《录像带性能的测量方法》.pdf

IEC 60738-1-2006 Thermistors - Directly heated positive temperature coefficient - Part 1 Generic specification《热敏电阻器.直热式正温度系数.第1部分 总规范》.pdf

IEC 60739-1983 Digital counting ratemeters Characteristics and test methods《数字式计数率表 特性和试验方法》.pdf

IEC 60740-2-1993 Laminations for transformers and inductors for use in telecommunication and electronic equipment part 2 specification for the minimum permeabilities of laminations.pdf

IEC 60745-1-2006 Hand-held motor-operated electric tools - Safety - Part 1 General requirements《手持式电动工具.安全.第1部分 一般要求》.pdf

IEC 60745-2-1-2006 Hand-held motor-operated electric tools - Safety - Part 2-1 Particular requirements for drills and impact drills《手持式电动工具.安全性.第2-1部分 电钻和冲击钻的特殊要求》.pdf

IEC 60745-2-11-2006 Hand-held motor-operated electric tools - Safety - Part 2-11 Particular requirements for reciprocating saws (jig and sabre saws)《手持式电动工具.安全.第2-11部分 往复锯(曲线锯和刀锯)的特殊要求》.pdf