YS T 1032-2015 Inspection method of the interior defects for cathode carbon block for aluminium electrolysis《铝电解用阴极炭块内部缺陷检验方法》.pdf

相关资源

YS T 649-2018 铜及铜合金挤制棒.pdf

YS T 679-2018 非本征半导体中少数载流子扩散长度的测试表面光电压法.pdf

YS T 662-2018 铜及铜合金挤制管.pdf

YS T 540.7-2018 钒化学分析方法第7部分：氧量的测定惰气熔融红外吸收法.pdf

YS T 988-2014 羧乙基锗倍半氧化物.pdf

YS T 540.5-2018 钒化学分析方法第5部分：杂质元素测定电感耦合等离子体原子发射光谱法.pdf

YS T 1288.3-2018 高纯锌化学分析方法第3部分：砷量的测定 氢化物发生-原子荧光光谱法.pdf

YS T 79-2018 硬质合金焊接刀片.pdf

YS T 584-2018 电极材料用铬、锆铜棒材.pdf

YS T 699-2018 铝电解用石墨化阴极炭块.pdf

猜你喜欢

FORD WSK-M4D864-A3-2008 ABS GENERAL PURPOSE RECOMPOUNDED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《通用丙烯腈-丁二烯-苯乙烯共聚物(ABS)再混成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD ES.pdf

FORD WSK-M4D872-A-1993 POLYPHTHALAMIDE (PPA) 25 % GLASS FIBER REINFORCED MOLDING COMPOUND《25%玻璃纤维增强的聚邻苯二甲酰胺（PPA）成型料》.pdf

FORD WSK-M4D873-A1-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 10% MINERAL FILLED COLOR PIGMENTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《10%矿物填充 内部着色热塑性.pdf

FORD WSK-M4D873-A2-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 10% MINERAL FILLED PAINTABLE VIRGIN AND OR RECYCLATE TO BE USED WITH FORD WSS-M99P1111-A 《10%矿物填充可涂装的未利用和 或回收的热塑性.pdf

FORD WSK-M4D876-A1-2009 ABS HIGH HEAT RESISTANT HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物(ABS)耐高温、高抗冲成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 F.pdf

FORD WSK-M4D876-A2-2011 ABS HIGH HEAT RESISTANT HIGH IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D876-A1)《内部耐高温耐冲击丙烯腈模塑材料 与福特WSS-M9.pdf

FORD WSK-M4D876-A3-2009 ABS HIGH HEAT RESISTANT HIGH IMPACT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D876-A1)《汽车外部用丙烯腈-丁二烯-苯乙烯共聚物(ABS)耐高.pdf

FORD WSK-M4D877-A-2006 POLYAMIDE 66 (PA66) 20% ARAMID FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D653-A)《20%聚芳基酰胺纤维增强的聚酰胺66成型料 与标准FORD WSS-.pdf

FORD WSK-M4D878-A-2011 POLYARYLETHERKETONE (PAEK) SELF-EXTINGUISHING (SE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《自熄型(SE)聚芳醚酮(PAEK)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf