YS T 3016-2013 Special reactor for ozone oxidation process《臭氧氧化工艺用反应器》.pdf

相关资源

YS T 649-2018 铜及铜合金挤制棒.pdf

YS T 679-2018 非本征半导体中少数载流子扩散长度的测试表面光电压法.pdf

YS T 662-2018 铜及铜合金挤制管.pdf

YS T 540.7-2018 钒化学分析方法第7部分：氧量的测定惰气熔融红外吸收法.pdf

YS T 988-2014 羧乙基锗倍半氧化物.pdf

YS T 540.5-2018 钒化学分析方法第5部分：杂质元素测定电感耦合等离子体原子发射光谱法.pdf

YS T 1288.3-2018 高纯锌化学分析方法第3部分：砷量的测定 氢化物发生-原子荧光光谱法.pdf

YS T 79-2018 硬质合金焊接刀片.pdf

YS T 584-2018 电极材料用铬、锆铜棒材.pdf

YS T 699-2018 铝电解用石墨化阴极炭块.pdf

猜你喜欢

ASTM F1307-2002(2007) Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor《用电量传感器测定固体包装件氧传输率的标准试验方法》.pdf

ASTM F1307-2014 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor《利用库伦传感器的干燥包装件氧透过率的标准试验方法》.pdf

ASTM F1308-1998(2003) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products《食品用微波传感器中易挥发可萃取物量化的测试方法》.pdf

ASTM F1308-1998(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products《食品用微波传感器中易挥发可萃取物量化的标准试验方法》.pdf

ASTM F1308-1998(2014) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products《测定食品用微波感受器中挥发性可萃取物数量的标准试验方法》.pdf

ASTM F1309-1998(2003) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations《船用机械基础制动器的安装程序的标准操作规程》.pdf

ASTM F1309-1998(2007) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations《船用机械基座固定楔安装程序的标准实施规程》.pdf

ASTM F1309-1998(2012) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations《船用机械基座固定楔安装程序的标准实施规程》.pdf

ASTM F1309-1998(2018) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations.pdf